[App_rpt-users] Baofeng UV5R + DMK URI 's. (Wiring & COS etc?)

[Skyler F]

If you do not want to take apart your baofeng, you can still get COS.

Build this simple 1 transistor circuit

https://www.youtube.com/watch?v=QopvHGM-9_k

Even if the volume is all the way down, the COR detect still goes off when
it gets a signal due to a DC offset in the radio i think. Just make sure
you turn off the voice in the UV5R so it doesen't go off when you press
buttons.

See my portable AllStar node on my qrz.com page

73 Skyler
KDØWHB


On Wed, Aug 5, 2015 at 10:49 PM, Doug Crompton <doug at crompton.com> wrote:

> Ken,
>
>  Unless you use a VOX circuit on the RX audio which I do not recommend you
> will have to go inside. We have used the Baofeng 888's with success as node
> radios. Info on the mod is in the how=to section at hamvoip.org  I
> believe the UV5 uses a similar approach.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> > To: app_rpt-users at ohnosec.org
> > From: vk4akp at gmail.com
> > Date: Thu, 6 Aug 2015 13:31:00 +1000
> > Subject: [App_rpt-users] Baofeng UV5R + DMK URI 's. (Wiring & COS etc?)
>
> >
> > Giday!
> >
> > So, still waiting on my Raspberry PI2 's. But they must be getting
> closer.
> > All other items ordered that same day from China have arrived 1+ weeks
> ago!
> > In the mean time I'd like to make the cabling up.
> >
> > For our first attempt we're going to utilise some Baofeng UV5R 's that
> > we already have handy.
> >
> > Has anyone been down this trail before that can help with wiring
> > instructions with the DMK URI 's?
> > Mainly interested if we need any cap's or resistors across any lines to
> > to isolate audio or for COS etc?
> >
> > Not interested in hacking into the radio's at all for internal
> > connection. If it can't be done on the standard external connectors we
> > won't bother.
> >
> > However I doubt this will be the case as we have used them with the
> > AnyTone portable repeater controllers and they detect COS etc A-OK from
> > the basic connectors.
> >
> >
> > ~Ken - vk4akp
> > .-.-.
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
> >
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150806/251c41c1/attachment.html>