[App_rpt-users] rpt.conf questions

[Steve Agee]

Courtesy tones are global. So, no way to have different stanzas for 
different nodes. At least, that's what I found a while back when I tried 
to have different stanzas. Maybe a newer SVN is out that I have not 
tested that allows it, I'm not sure.

N5ZUA

On 2/3/2015 9:46 AM, Geoff wrote:
> So, I've got some defines ...
>
> ;******************
> ;* Stanza Defines *
> ;vvvvvvvvvvvvvvvvvv
> ;
> ;controlstates=controlstates29655
> scheduler=schedule29655
> morse=morse29657
> macro=macro29655
> functions=functions29655
> phone_functions=functions29655
> link_functions=functions29655
> telemetry=telemetry29655
> wait_times=wait-times29655
> ;
> idtalkover=|iW5OMR R
> unlinkedct=ct2                                  ;Courtesy tone sound the
> node makes when not linked
> remotect=ct3                                    ;Courtesy tone sound the
> node makes when linked
> linkunkeyct=ct8                                 ;Courtesy tone sound the
> node makes when a remote linked system unkeys
> nolocallinkct=0
> eannmode=2
> echolinkdefault=0
> echolinkdynamic=0
> nounkeyct=0
> telemdefault=2                                  ;temetry mode
> ;                                               0 = telemetry output off,
> ;                                               1 = telemetry output on,
> ;                                               2 = timed telemetry
> output on command execution and for a short time thereafter
>
> specifically, at this time, I'm concerned about Courtesy tones.  So,
> let's go down to the telemetry stanza for 29655...
>
> [telemetry29655]
> ;
> ;when NOT linked
> ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048)
> ;
> ;when Linked
> ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)
> ;
> ct4=|t(550,0,150,1048)(550,0,150,1048)
> ct5=|t(660,0,150,2048)
> ct6=|t(880,0,150,2048)
> ct7=|t(660,440,150,2048)
> ; When remote link unkeys
> ct8=|t(0,0,10,0)(350,440,50,2048)(0,0,50,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048)
> ;
> ct9=|t(660,680,100,4000)(0,0,100,0)(660,680,100,1000)(0,0,100,0)(660,680,100,250)
> remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048)
> remotemon=|t(1009,0,50,2048)
> cmdmode=|icm ;(220,247,262,294,330,350,392,2048)
> functcomplete=|iEN
> patchup=rpt/callproceeding
> patchdown=rpt/callterminated
> ;
> ;
> ; This section allows wait times for telemetry events to be adjusted
> ; A section for wait times can be defined for every repeater
> ;
> [wait-times29655]
> telemwait=150
> idwait=10
> unkeywait=650
> calltermwait=150
>
>
> but, regardless of how I change the CT's, it remains the same, when
> asterisk is stopped and restarted, even when the machine is rebooted,
> the courtesy tone remains the same.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>