[App_rpt-users] strange courtesy tone (or I'm going insane)
Bryan Fields
Bryan at bryanfields.net
Mon Feb 9 05:19:53 UTC 2015
On 2/9/15, 12:06 AM, mike at midnighteng.com wrote:
> Bryan,
>
> Not Defined?
> I would put a definition in there as it is probably using a default since
> nothing has been defined.(guessing from what you said). I have never not
> defined them to know for sure.
>
> Just copy the [telemetry] section from one of your other nodes and use it.
I'm using a common [telemetry] section. I've grep'd out the comments in my
rpt.conf below. I'm stumped :)
> root at asterisk:/etc/asterisk# grep "^[^#;]" rpt.conf
> [40821] ; Change this to your assigned node number
> rxchannel = Voter/1234 ; Rx audio/signalling channel
> erxgain=-9 ; Echolink receive gain adjustment
> etxgain=-3 ; Echolink transmit gain adjustment
> functions=functions ; Repeater Function Table
> phone_functions=functions ; Repeater Function Table
> link_functions=functions ; Link Function Table
> telemetry=telemetry ; Telemetry descriptions
> wait_times=wait-times ; Wait times
> macro=macro
> startup_macro=*95329094
> context = radio ; dialing context for phone
> callerid = "Repeater" <0000000000> ; callerid for phone calls
> idrecording = |iW9CR ; id recording or morse string
> accountcode=RADIO ; account code (optional)
> hangtime=3000 ; squelch tail hang time (in ms) (optional)
> althangtime=6000 ; longer squelch tail
> totime=180000 ; transmit time-out time (in ms) (optional)
> idtime=540000 ; id interval time (in ms) (optional)
> politeid=30000 ; time in milliseconds before ID timer
> idtalkover=none ; Talkover ID (optional) default is none
> unlinkedct=ct4 ; unlinked courtesy tone (optional) default is none
> remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
> linkunkeyct=ct8 ; sent when a transmission received over the link unkeys
> nolocallinkct=0 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
> eannmode=2 ; Default: 1 = Say only node number on echolink connects
> beaconing=1 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US)
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> [902]
> rxchannel = Zap/1 ; Rx audio/signalling channel
> erxgain=-9 ; Echolink receive gain adjustment
> etxgain=-3 ; Echolink transmit gain adjustment
> duplex=2
> functions=functions ; Repeater Function Table
> phone_functions=functions ; Repeater Function Table
> link_functions=functions ; Link Function Table
> telemetry=telemetry ; Telemetry descriptions
> wait_times=wait-times ; Wait times
> macro=macro
> context = radio ; dialing context for phone
> callerid = "Repeater" <0000000000> ; callerid for phone calls
> idrecording = |iW9CR ; id recording or morse string
> accountcode=RADIO ; account code (optional)
> hangtime=3000 ; squelch tail hang time (in ms) (optional)
> althangtime=6000 ; longer squelch tail
> totime=180000 ; transmit time-out time (in ms) (optional)
> idtime=540000 ; id interval time (in ms) (optional)
> politeid=30000 ; time in milliseconds before ID timer
> idtalkover=none ; Talkover ID (optional) default is none
> unlinkedct=ct4 ; unlinked courtesy tone (optional) default is none
> remotect=ct3 ; remote linked courtesy tone (indicates a remote is in the list of links)
> linkunkeyct=ct8 ; sent when a transmission received over the link unkeys
> nolocallinkct=1 ; Send unlinkedct instead if another local node is connected to this node (hosted on the same PC).
> eannmode=2 ; Default: 1 = Say only node number on echolink connects
> beaconing=1 ; Send ID regardless of repeater activity (Required in the UK, but probably illegal in the US)
> statpost_program=/usr/bin/wget,-q,--timeout=15,--tries=1,--output-document=/dev/null
> statpost_url=http://stats.allstarlink.org/uhandler.php ; Status updates
> [functions]
> 1=ilink,1
> 2=ilink,2
> 3=ilink,3
> 4=ilink,4
> 5=macro,1
> 70=ilink,5
> 71=ilink,6 ; disconnect all links
> 72=ilink,7 ; Last Node to Key Up
> 73=ilink,15
> 74=ilink,16
> 75=ilink,8
> 80=status,1
> 81=status,2
> 6=autopatchup,noct=1,farenddisconnect=1,dialtime=20000 ; Autopatch up
> 0=autopatchdn ; Autopatch down
> 989=cop,4
> 980=status,3
> 99=cop,6
> 951=ilink,11 ; Permanent link disconnect
> 952=ilink,12 ; Permanent link receive
> 953=ilink,13 ; Permanent link transceive
> [telemetry]
> ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
> ct2=|t(660,880,150,2048)
> ct3=|t(440,0,150,4096)
> ct4=|t(550,0,150,2048)
> ct5=|t(660,0,150,2048)
> ct6=|t(880,0,150,2048)
> ct7=|t(660,440,150,2048)
> ct8=|t(700,1100,150,2048)
> remotetx=|t(1633,0,50,3000)(0,0,80,0)(1209,0,50,3000);
> remotemon=|t(1209,0,50,2048)
> cmdmode=|t(900,903,200,2048)
> functcomplete=|t(1000,0,100,2048)(0,0,100,0)(1000,0,100,2048)
> patchup=rpt/callproceeding
> patchdown=rpt/callterminated
> eannmode=2 ; announce callsign only
> [morse]
> speed=20 ; Approximate speed in WPM
> frequency=300 ; Morse Telemetry Frequency
> amplitude=4096 ; Morse Telemetry Amplitude
> idfrequency=660 ; Morse ID Frequency
> idamplitude=1024 ; Morse ID Amplitude
> [wait-times]
> telemwait=2000 ; Time to wait before sending most telemetry
> idwait=500 ; Time to wait before starting ID
> unkeywait=2000 ; Time to wait after unkey before sending CT's and link telemetry
> calltermwait=2000 ; Time to wait before announcing "call terminated"
> [nodes]
> 40821 = radio at 127.0.0.1/40821,NONE ; This must be changed to your node number
> 902 = radio at 127.0.0.1/902,NONE
> [memory]
> [macro]
--
Bryan Fields
727-409-1194 - Voice
727-214-2508 - Fax
http://bryanfields.net
More information about the App_rpt-users
mailing list