[App_rpt-users] strange courtesy tone (or I'm going insane)

[mike at midnighteng.com]

Bryan,

Not Defined?
I would put a definition in there as it is probably using a default since
nothing has been defined.(guessing from what you said). I have never not
defined them to know for sure.

Just copy the [telemetry] section from one of your other nodes and use it.

...mike/kb8jnm


> I've defined a local node (902) for testing my 902 MHz repeater.  It's on
> PCIRADIO/1 and it's up and going on the test box.
>
> When I link it over to my node 40821, (224.28) it works come up and the
> repeater audio works as intended.
> However when using the 40821 node (ie input on 222.68) it has a courtesy
> tone
> added in only when the local node is linked.  This tone is 6 fast beeps at
> 1800 hz (give or take what audacity says).
>
> I can't find it defined in my rpt.conf at all.  I've really run out of
> ideas
> here, and think I might be going insane.
>
> I have audio of it up here
> http://keekles.org/~w9cr/40821%20wierd%20tone.wav
>
> Anyone have any ideas?
>
> --
> Bryan Fields
>
> 727-409-1194 - Voice
> 727-214-2508 - Fax
> http://bryanfields.net
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>