[App_rpt-users] 2 nodes setup to auto connect don't seem to work

[Mike Lussier]

I figured with them on the same subnet they would talk directly to each
other and there was no need to go out to the internet to make their
connection.

On Mon, Feb 9, 2015 at 1:05 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:

> I’m assuming your nodes are on separate servers.
>
> Some routers don’t do what is called hairpin NAT. That is connecting from
> an address on your NATed to the public IP address of a service on the same
> NATed network won’t work.
>
> Or the problem could be that your servers are set to the same port and/or
> the router port forwarding is not correct.
>
> In any case nodes on the same NATed network should have the IP address of
> the other nodes listed in the [nodes] stanza of rpt.conf. The port is
> needed if not default (4569).
>
>
> [nodes]
> ; Note, if you are using automatic update for allstar link nodes,
> ; no allstar link nodes should be defined here. Only place a definition
> ; for your local nodes, and private (off of allstar link) nodes here.
> 2510 = radio at 127.0.0.1:4570/2510,NONE                    ; Local node
> 2502 = radio at 192.168.1.12:4571/2502,NONE  ; other node
>
> --
> Tim
> :wq
>
> On Feb 9, 2015, at 9:11 AM, Mike Lussier <mike.lussier at gmail.com> wrote:
>
> Good afternoon all,
> I have two nodes on my internal network. both on the same subnet. for the
> past 16 hours if I look at either node that show state as "Connecting" and
> not connected .
>
> Any thoughts ? I tried it once from one node running a script and before I
> went to bed last night I tried it from the other side.
>
>
> Mike AE4ML
>
> --
>
> *"We must reject the idea that every time a law is broken, society is
> guilty rather than the law breaker.It is time to restore the American
> precept that each individual is accountable for his actions." ~ Ronald
> Regan*
>
>  _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
>
>


-- 

*"We must reject the idea that every time a law is broken, society is
guilty rather than the law breaker.It is time to restore the American
precept that each individual is accountable for his actions." ~ Ronald
Regan*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150209/571aece1/attachment.html>