[App_rpt-users] Frequency Agile Remote - XCAT FUBAR
Sam Skolfield
kj6qfs at gmail.com
Sun Jan 4 13:06:52 UTC 2015
Robert / Everyone,
What ever came of the problem you were having with getting your Allstar
node to control your xcat? I'm planning on configuring mine here this week,
and I'm looking for any help or advice as to any "tricks" that I should
know. So far, it looks like all I need to do is define the remote base type
as "xcat" in the remote stanza, and specify the serial port as well (I'll
have two xcats, with a node for each).
Thanks and Happy New Year.
Sam
KJ6QFS
On Thu, Aug 1, 2013 at 8:38 PM, Robert Poff <wb3awj at comcast.net> wrote:
> Tim,
>
> Below are the pertinent lines from the rpt.conf.
>
> As to the CIV.....
> As we sit now, if I send a *017 command (supposed to load 146.520
> simplex), the debug output says this:
>
> String output was �� �'Ms:
> FE FE 20 E0 08 01 FD
> Which from what I find online says that function 08 is set memory mode.
>
> I think, the string should be : FE FE 20 E0 05 00 00 52 06 14 FD .
> Function 05 being set frequency with acknowledgment.
> Or possibly FE FE 20 E0 00 00 0 052 06 14 FD . Function 00 be set
> frequency without acknowledgment.
>
> To prove this out, I'll make a file with only those values in it with a
> hex editor, and blow it out ttyS0 to the xcat and see what happens.
>
> I'll anxiously await to see if anything is wrong.
>
>
>
> functions = functions-remote
> phone_functions = functions-remote
>
> lconn = PP3=1 ; Turn ON Fan
> ldisc = PP3=0 ; Turn OFF Fan
> memory = memory ; Section to hold memory entries (optional)
> remote = xcat ; Radio Command format
> ; remote=ft897 for Yaesu FT-897 or
> ; remote=rbi for Doug Hall RBI1
> ; remote=kenwood for Kenwood mobiles such as the TMG707A
> ; remote=ic706 for the Icom IC-706
> ; remote=xcat for Syntor X with XCAT board
> civaddr = 32 ; CI-V address in DECIMAL
> ioport = /dev/ttyS0 ; Specify port for serial port (optional)
> iospeed = 19200 ; COMM port speed
> dusbabek = yes ; either you need it or you don't
> authlevel = 0 ; Remote base authentication level
> ; authlevel = 0 : Anyone can use it
> ; authlevel = 1 : Requires log in, Waits for Tx key to ask for
> it
> ; authlevel = 2 : Requires log in, asks for it automously
> ;mars = 1 ; set=1 for IC-706 w/MARS mods (optional)
> ;
> remote_inact_timeout=0 ; Inactivity timer for remote base nodes only (set
> to 0 to disable).
> remote_timeout=5400 ; Session time out for remote base. (set to 0 to
> disable)
> split2m = 600 ; Set the default tx split to 600 KC
>
> [functions-remote]
> 0=remote,1 ; Retrieve Memory
> 1=remote,2 ; Set freq. example :
> *1146*520*1 for 146.520 (-) Split
>
> ; *1146*970*2 for 146.970 ( ) Simplex
>
> ; *1147*330*3 for 147.330 (+) Split
> 2=remote,3 ; Set tx PL tone
> 3=remote,4 ; Set rx PL tone
> 5=macro,1 ; Call MACROS
> 40=remote,100 ; Rx PL off
> 41=remote,101 ; Rx PL on
> 42=remote,102 ; Tx PL off
> 43=remote,103 ; Tx PL on
> 44=remote,104 ; Low Power
> 45=remote,105 ; Medium Power
> 46=remote,106 ; High Power
> 711=remote,107 ; Bump -20
> 714=remote,108 ; Bump -100
> 717=remote,109 ; Bump -500
> 713=remote,110 ; Bump +20
> 716=remote,111 ; Bump +100
> 719=remote,112 ; Bump +500
> 721=remote,113 ; Scan - slow
> 724=remote,114 ; Scan - quick
> 727=remote,115 ; Scan - fast
> 723=remote,116 ; Scan + slow
> 726=remote,117 ; Scan + quick
> 729=remote,118 ; Scan + fast
> 79=remote,119 ; Tune (brief AM transmission for
> automatic antenna tuner)
> 61=remote,5 ; Long status query
> 62=remote,140 ; Short status query
> 67=remote,210 ; Send a *
> 69=remote,211 ; Send a #
> 91=remote,99,CALLSIGN,LICENSETAG ; Remote base login.
>
>
> [memory]
> ; Memories for remote bases
> ;Syntax : CC=RRR.RRR,PPP.P,AAAAA
> ; C=Channel Number
> ; R=RX Frequency
> ; P=PL Frequency
> ; A=Attributes
> ;
> ;Attributes : a=AM b=LSB f=FM u=USB
> ; l=Low Power m=Medium Power h=High Power
> ; -=Minus TX Offset s=Simplex +=Plus TX Offset
> ; t=TX PL on r=RX PL on
> ;
> init=145.670,123.0,shrt ;Set to this on startup
>
> 00=145.510,123.0,sht ;Simplex, High Power, PL Encode
> 01=145.530,123.0,sht ;Simplex, High Power, PL Encode
> 02=145.550,123.0,sht ;Simplex, High Power, PL Encode
> 03=145.570,123.0,sht ;Simplex, High Power, PL Encode
>
> <SNIP>
> 17=146.520,123.0,sht ;National Simplex/Calling
>
> <SNIP>
> --
> *Robert A. Poff*
> *Loganville, PA*
>
> *S/V Loon <http://wb3awj.hobby-site.org/loon.htm>*
> *1983 Hunter 34*
> *Havre de Grace, MD.*
>
> WB3AWJ* - Allstar 27784*
> *Powered by Linux*
>
> On Thu, 2013-08-01 at 15:46 -0700, Tim Sawyer wrote:
>
> Maybe you have something wrong with your remote [functions] stanza. Let's
> see that that looks like on your system.
>
> --
>
> Tim
>
> :wq
>
>
> On Aug 1, 2013, at 3:19 PM, Robert A. Poff WB3AWJ <wb3awj at comcast.net>
> wrote:
>
>
> Still digging on my Agile Remote.
>
> Acid with a Syntor X and XCAT.
> When I try to set a frequency, it's sending the CIV string to retrieve a
> memory from the radio.
> Not the string needed to set it from one of the memory entries in
> rpt.conf.
>
> Running Asterisk in the foreground with all the debug turned up here's
> what I see on the console executing a *017 command :
>
> @@@@ action: remote, param = 1
> @@@@ table index i = 5
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17558 function_remote: 28260
> param=1 digitbuf=17 source=2
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17483 get_mem_set: digitbuf=17
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:4225 retrieve_memory: memory=17
> block=memory
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint
> rpt_telemetry() entered mode=38
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint
> rpt_telemetry() exit
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:17486 get_mem_set:
> freq=146.520 res=0
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:12849 collect_function_digits:
> rv=3
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10476 rpt_telemetry: Tracepoint
> rpt_telemetry() entered mode=3
> [Aug 1 15:06:09] NOTICE[2718]: app_rpt.c:10760 rpt_telemetry: Tracepoint
> rpt_telemetry() exit
> Mode
> [Aug 1 15:06:09] NOTICE[2731]: app_rpt.c:13870 serial_remote_io:
> ioport=/dev/ttyS0 baud=14 iofd=0x19
> String output was �� �'Ms:
> FE FE 20 E0 08 01 FD
> [Aug 1 15:06:09] NOTICE[2732]: app_rpt.c:8420 wait_interval: Delay
> interval = 2000
> [Aug 1 15:06:10] WARNING[2731]: app_rpt.c:13910 serial_remote_io: -99999
> Serial device not responding on node 28260
> Offset Initial/Simplex
> Frequency
> Offset
> CTCSS
> Frequency
> [Aug 1 15:06:10] NOTICE[2731]: app_rpt.c:8420 wait_interval: Delay
> interval = 2000
> [Aug 1 15:06:11] NOTICE[2732]: app_rpt.c:8424 wait_interval: Delay
> complete
> -- Hungup 'Zap/pseudo-1521668112'
> [Aug 1 15:06:12] NOTICE[2731]: app_rpt.c:8424 wait_interval: Delay
> complete
> -- <Zap/pseudo-1162233705> Playing 'rpt/invalid-freq' (language 'en')
>
> At one point I added a statement to printf myrpt->remoterig variable in
> the check_freq function.
> It returned "myrpt->remoterig=Mode" ?????
> Shouldn't that be "xcat", or "remote_rig_xcat" ?
>
> Any suggestions where I should be looking?
>
>
>
>
> Robert A. Poff
> Loganville, PA.
>
>
> "Lieutenant, target the offending power boat and launch photon torpedoes"
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
--
KJ6QFS
Sam Skolfield
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150104/60c7db2a/attachment.html>
More information about the App_rpt-users
mailing list