[App_rpt-users] COR/PTT through SIP

[Ismael Isuani]

Mike,

You can send * dtmf to key and # dtmf to unkey.

extensions.conf

exten => 1001,1,Rpt(1001|S)
same => n,Hangup()

from you SIP client dial 1001 and then press * and #.

I use my cell with zoiper app and works perfectly.

that's what you need?

Ismael


2015-01-09 13:11 GMT-03:00 Mike M <kf7mbk at w7ara.net>:

> Has anyone every looked into getting COR and PTT signaling through a
> SIP transport?
>
> If not, can anyone give a very high level overview of what mods would
> be required to do so?
>
>
> Regards,
> Mike Montalvo, KF7MBK
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150109/35bc6e44/attachment.html>