[App_rpt-users] COR/PTT through SIP

[Mike Montalvo]

Ismael,

Thanks.  Yes, I have done that and maybe I'm not familiar enough with the
inner workings, but I want to be able to send PTT and COR signals out of
band over SIP.

-Mike


On Fri, Jan 9, 2015 at 9:41 AM, Ismael Isuani <ismaelisuani at gmail.com>
wrote:

> Mike,
>
> You can send * dtmf to key and # dtmf to unkey.
>
> extensions.conf
>
> exten => 1001,1,Rpt(1001|S)
> same => n,Hangup()
>
> from you SIP client dial 1001 and then press * and #.
>
> I use my cell with zoiper app and works perfectly.
>
> that's what you need?
>
> Ismael
>
>
> 2015-01-09 13:11 GMT-03:00 Mike M <kf7mbk at w7ara.net>:
>
>> Has anyone every looked into getting COR and PTT signaling through a
>> SIP transport?
>>
>> If not, can anyone give a very high level overview of what mods would
>> be required to do so?
>>
>>
>> Regards,
>> Mike Montalvo, KF7MBK
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150109/5f927df1/attachment.html>