[App_rpt-users] Node Status not showing...

[Jah Rastafari]

Yeah, I can wait and see what develops. It's not the end of the world; it's
just getting the online status is better manners than subjecting
everyone (who isn't on a repeater with unnecessary Alison jabbering turned
off) having to hear 30 repeater connections listed over the air...

Bob/KK6RQ

On Sun, Jan 11, 2015 at 8:28 PM, <mike at midnighteng.com> wrote:

>
>
> You could be having some problems with internet host (especially if it
> is comcast).
> Probably temporary, don't go changing your settings over it just yet.
> Give it a few days and reboots (computer and router) to see how it pans
> out.
>
>
> ...mike/kb8jnm
>
> > -------- Original Message --------
> > Subject: Re: [App_rpt-users] Node Status not showing...
> > From: Jah Rastafari <nuhtrue at gmail.com>
> > Date: Sun, January 11, 2015 9:20 pm
> > To: mike at midnighteng.com,  "app_rpt-users at ohnosec.org"
> > <app_rpt-users at ohnosec.org>
> >
> >
> > I went back right after reading your reply (several hours after my
> original
> > post) and it in fact came up the way it should. But then 5 minutes
> > later it went back to saying I wasn't connected. I'm not sure what it
> means
> > but I can say I've never seen it behave like this before.
> >
> > On Sun, Jan 11, 2015 at 4:56 PM, <mike at midnighteng.com> wrote:
> >
> > >
> > >
> > >
> > > Not sure but....
> > >
> > > I think you are only suffering from a delay of the update to the list.
> > >
> > > Try waiting for a short while (up to 30min) and look again.
> > > Others have said it takes that long sometimes but I have only witnessed
> > > about 5-6min.
> > >
> > > Guess it depends on how busy the server is.
> > >
> > >
> > > ...mike/kb8jnm
> > >
> > > > -------- Original Message --------
> > > > Subject: [App_rpt-users] Node Status not showing...
> > > > From: Jah Rastafari <nuhtrue at gmail.com>
> > > > Date: Sun, January 11, 2015 5:29 pm
> > > > To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> > > >
> > > >
> > > > Forgive me if this has already been discussed and I missed it, but I
> just
> > > > noticed recently that although I was connected to a number of other
> > > > nodes/repeaters, the 'Node Status' selection on the Allstar site
> says I'm
> > > > not connected to anything. My node(s) show up properly in the
> available
> > > > node list and everything else is as it should be. The Web Transceiver
> > > works
> > > > properly also and I haven't changed anything recently. Am I missing
> > > > something?
> > > >
> > > > Bob/ KK6RQ<hr>_______________________________________________
> > > > App_rpt-users mailing list
> > > > App_rpt-users at ohnosec.org
> > > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> > > >
> > > > To unsubscribe from this list please visit
> > > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> down
> > > to the bottom of the page. Enter your email address and press the
> > > "Unsubscribe or edit options button"
> > > > You do not need a password to unsubscribe, you can do it via email
> > > confirmation. If you have trouble unsubscribing, please send a message
> to
> > > the list detailing the problem.
> > >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150111/7648d504/attachment.html>