[App_rpt-users] changing funcchar in rpt.conf messed up echolink

[Elden Fenison]

Thanks Doug. I will leave them set to defaults then.

On Sun Jan 18 2015 at 6:13:08 PM Doug Crompton <doug at crompton.com> wrote:

> Sometimes playing around can get you in trouble. I would not advise doing
> that, especially A-D as those characters are not on all devices including
> iaxrpt.  The *3, *1  and a couple of others are considered mandatory
> functions. That is they are suppose to stay that way for all users. There
> is no law about that but it is highly recommended.
>
>
>
> *73 DougWA3DSPhttp://www.crompton.com/hamradio
> <http://www.crompton.com/hamradio>*
>
>
> ------------------------------
> From: w7ldn at w7ldn.com
> Date: Sun, 18 Jan 2015 22:07:21 +0000
> To: App_rpt-users at ohnosec.org
> Subject: [App_rpt-users] changing funcchar in rpt.conf messed up echolink
>
>
> I thought I would change the command prefix of my private simplex node to
> be D rather than *. Using the funcchar parm in rpt.conf seemed to work in
> general. But for some reason echolink would no longer complete outbound
> connections. I'm betting that there is a separate parameter for the
> echolink funcchar value. However I wasn't able to find it documented. Any
> ideas?
> _______________________________________________ App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
> from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button" You do not need a password to
> unsubscribe, you can do it via email confirmation. If you have trouble
> unsubscribing, please send a message to the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150119/ee7186f0/attachment.html>