[App_rpt-users] compile on Debian

[Bryan Fields]

No, this is a 3.2 kernel (needed it for the server) so it's dahdi, my old box is running the old stable debian, and its the zaptel drivers which work.

I'll update in a few once I get in front of a pc

On January 27, 2015 2:19:24 PM EST, Steve  Zingman <szingman at msgstor.com> wrote:
>The node I am running a PCI card is still Squeeze, so it's zaptel but,
>Are the config files for the PCI card installed?
>zapata.conf in /etc/asterisk
>zaptel.conf in /etc
>
>also try to add  "options pciradio debug=1" in /etc/modprobe.conf
>
>longshot, but worth asking.
>
>Steve
>
>On 1/27/2015 2:08 PM, Bryan Fields wrote:
>> Pciradio. I am going to write a longer bug report once I pull it into
>
>> gdb later today
>>
>> On January 27, 2015 2:00:59 PM EST, Steve Zingman 
>> <szingman at msgstor.com> wrote:
>>
>>     Bryan,
>>     Do you get the crash when you start dahdi or when you modprobe
>pciradio?
>>
>>     Steve
>>
>>     On 1/27/2015 9:51 AM, app_rpt-users-request at ohnosec.org wrote:
>>
>>         Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan
>>         Fields<Bryan at bryanfields.net> To:"app_rpt-users at ohnosec.org"
>>         <app_rpt-users at ohnosec.org> Subject: Re: [App_rpt-users]
>>         compile on debian (was More than 4 nodes on a PC)
>>         Message-ID:<54C74E83.60203 at bryanfields.net> Content-Type:
>>         text/plain; charset=ISO-8859-1 On 1/27/15, 1:04 AM, Doug
>>         Crompton wrote:
>>
>>                 Bryan, Yes you will need Dahdi source. You need to
>>                 remove Zaptel stuff. I would suggest getting it from
>>                 the BBB image at hamvoip.org <http://hamvoip.org>. It
>>                 already has the Allstar patches in it. It is located
>>                 in /usr/src/utils/dahdi-linux-complete-2.9.1.1
>>                 <http://2.9.1.1>+2.9.1 If not you need to download
>>                 that version of the code from Digium and apply the
>>                 patches from the Allstar svn site. 
>>
>>         I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1
>>         <http://2.10.0.1>+2.10.0.1 <http://2.10.0.1>) and applied the
>>         patches from ohnosec svn. hunk 3 on patch 2 needed to be
>>         applied by hand, the rest went fine. Dahdi is compiled and
>>         installed. I have the ohnosec svn asterisk compiled as well.
>>         Copied the sounds in place and started to configure asterisk.
>>         I've run into a bit of a problem while loading the pciradio
>>         module however. I don't know enough about kernel coding in
>>         linux to know where to begin debugging this. does your
>version
>>         of dahdi on the hamvoip.org <http://hamvoip.org> site work
>ok?
>>         perhaps it's new bug in the Digium code, and I should go with
>>         yours in place of it.
>>
>>
>>
>> --
>> Bryan Fields
>> 727-409-1194
>> http://bryanfields.net 
>
>-- 
>"Anything is possible if you don't know what you are talking about."
>1st Law of Logic

--
Bryan Fields
727-409-1194
http://bryanfields.net
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150127/96023f16/attachment.html>