[App_rpt-users] compile on Debian

[Steve Zingman]

The node I am running a PCI card is still Squeeze, so it's zaptel but,
Are the config files for the PCI card installed?
zapata.conf in /etc/asterisk
zaptel.conf in /etc

also try to add  "options pciradio debug=1" in /etc/modprobe.conf

longshot, but worth asking.

Steve

On 1/27/2015 2:08 PM, Bryan Fields wrote:
> Pciradio. I am going to write a longer bug report once I pull it into 
> gdb later today
>
> On January 27, 2015 2:00:59 PM EST, Steve Zingman 
> <szingman at msgstor.com> wrote:
>
>     Bryan,
>     Do you get the crash when you start dahdi or when you modprobe pciradio?
>
>     Steve
>
>     On 1/27/2015 9:51 AM, app_rpt-users-request at ohnosec.org wrote:
>
>         Message: 2 Date: Tue, 27 Jan 2015 03:38:27 -0500 From: Bryan
>         Fields<Bryan at bryanfields.net> To:"app_rpt-users at ohnosec.org"
>         <app_rpt-users at ohnosec.org> Subject: Re: [App_rpt-users]
>         compile on debian (was More than 4 nodes on a PC)
>         Message-ID:<54C74E83.60203 at bryanfields.net> Content-Type:
>         text/plain; charset=ISO-8859-1 On 1/27/15, 1:04 AM, Doug
>         Crompton wrote:
>
>                 Bryan, Yes you will need Dahdi source. You need to
>                 remove Zaptel stuff. I would suggest getting it from
>                 the BBB image at hamvoip.org <http://hamvoip.org>. It
>                 already has the Allstar patches in it. It is located
>                 in /usr/src/utils/dahdi-linux-complete-2.9.1.1
>                 <http://2.9.1.1>+2.9.1 If not you need to download
>                 that version of the code from Digium and apply the
>                 patches from the Allstar svn site. 
>
>         I've got Dahdi from Digium (dahdi-linux-complete-2.10.0.1
>         <http://2.10.0.1>+2.10.0.1 <http://2.10.0.1>) and applied the
>         patches from ohnosec svn. hunk 3 on patch 2 needed to be
>         applied by hand, the rest went fine. Dahdi is compiled and
>         installed. I have the ohnosec svn asterisk compiled as well.
>         Copied the sounds in place and started to configure asterisk.
>         I've run into a bit of a problem while loading the pciradio
>         module however. I don't know enough about kernel coding in
>         linux to know where to begin debugging this. does your version
>         of dahdi on the hamvoip.org <http://hamvoip.org> site work ok?
>         perhaps it's new bug in the Digium code, and I should go with
>         yours in place of it.
>
>
>
> --
> Bryan Fields
> 727-409-1194
> http://bryanfields.net 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150127/8efa1f14/attachment.html>