[App_rpt-users] Duplex / Telemetry / Courtesy Tone Question

[Mike M]

What part didn't I get right?  I suppose one could set the amplitude to 0.
But a really loud zero hz tone is still silence.


Regards,
Mike Montalvo, KF7MBK
ARA Membership Chair
www.w7ara.org






On Wed, Jan 28, 2015 at 5:23 PM, Geoff <ars.w5omr at gmail.com> wrote:

>
> On 01/28/2015 02:04 PM, Mike M wrote:
>
> Some entries have hard coded defaults where if you leave it out, it will
> default to something else, so if you want a silent telem, make a telemetry
> tone that is silent and set it as the tone.
>
>  I think you'll need to set remotetx in [telemetry] to a silent tone. If
> you leave it out it will default to some hardcoded tone.  I use
>
>  |t(0,0,10,2048)    ; silent  tone.
>
>
> Uhm... not quite, Mike...
>
> A tone group is a set of 4 comma separated integers formatted as follows:
>
> (frequency1,frequency2,duration,amplitude)
>
> frequency1 and frequency2 must be a number between 0 and 3000. These
> specify the tone frequency in Hz.
> duration is the tone on time in Milliseconds. amplitude is the relative
> volume level of the tone or tones. This can be from 0 to 8192.
>
> A tone group consisting of zeroes for amplitude and frequency will be sent
> as a silent period.
> A single frequency tone can be sent by setting frequency2 to zero.
>
> Note: There must be no spaces between the commas, numbers, or the
> parenthesis.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150128/5b152c18/attachment.html>