[App_rpt-users] Duplex / Telemetry / Courtesy Tone Question

[Andrew Sylthe]

Thank you to everyone that replied.  I believe I do have it figured out now.

Mike,  I hear what you're saying regarding the 0,0 tone.  My goal was to
keep the radio from transmitting altogether.  I didn't test it, but I
believe your suggestion would have transmitted a silent tone which isn't
what I was trying to accomplish.

Steve, I commented out the 'idrecording=' configuration option under my
node stanza, and that has effectively disabled the ID.  I didn't have to
touch anything in the [telemetry] stanza.

So, right now my node is set to duplex=1, there is no ID, and I only hear a
courtesy tone when a networked user unkeys.

Here are the pertinent configuration options I set under my node stanza to
accomplish this:

duplex=1
;idrecording=|iKC9ONA/L
; Telemetry & Courtesy Tone Options
telemetry=telemetry
;unlinkedct=ct2 ; Sent when not connected to another node
;remotect=ct3   ; Sent when remote base connected
linkunkeyct=ct8 ; sent when a network user unkeys
nolocallinkct=1
eannmode=2
echolinkdefault=0
echolinkdynamic=0
nounkeyct=1
holdofftelem=1
telemdefault=0
telemdynamic=0
guilinkdefault=0
guilinkdynamic=0
phonelinkdefault=0
phonelinkdynamic=0


Thanks!

On Wed, Jan 28, 2015 at 1:27 PM, Andrew Sylthe <asylthe at kc9ona.com> wrote:

> Hello All,
>
> I'm struggling to configure my simplex node in a particular way.  As of
> right now I have duplex=0 specified for my node in rpt.conf.  My goal is to
> maintain the functionality of duplex=0, but do want a courtesy tone to
> transmit ONLY when a remotely connected AllStar node unkeys.  I do not want
> the simplex node to ID or transmit a courtesy tone for local
> transmissions.  Has anyone else configured their node in such a way?  If
> so, would you be willing to share your configuration.
>
> I've tried setting duplex=1 in rpt.conf along with the following settings
> with no luck:
>
> ; Telemetry & Courtesy Tone Options
> telemetry=telemetry
> ;unlinkedct=ct2 ; Sent when not connected to another node
> remotect=ct3   ; Sent when remote base connected
> linkunkeyct=ct8 ; sent when a network user unkeys
> nolocallinkct=1
> eannmode=2
> echolinkdefault=0
> echolinkdynamic=0
> nounkeyct=0
> holdofftelem=1
> telemdefault=0
> telemdynamic=0
> guilinkdefault=0
> guilinkdynamic=0
> phonelinkdefault=0
> phonelinkdynamic=0
>
>
> Thank you in advance for anyone that is able to help!
>
> --
> Andrew Sylthe
> KC9ONA
>



-- 
Andrew Sylthe
KC9ONA
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150129/b1950b24/attachment.html>