[App_rpt-users] Removing the connection message

[Corey Dean]

You beat me on the reply.  You are correct.  I typed it wrong.

Corey

> On Jul 14, 2015, at 6:28 PM, Mike M <kf7mbk at w7ara.net> wrote:
> 
> Oh i was just poking around and found it.
> 
> var/lib/asterisk/sounds/rpt/nodenames
> 
> 
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
> 
> 
> 
> 
> 
> 
>> On Tue, Jul 14, 2015 at 3:27 PM, Mike M <kf7mbk at w7ara.net> wrote:
>> Thanks Doug.  There are some snippets I've seen in say, extensions.conf that you can see the announcement is pieced together.
>> 
>> exten=1998,1,answer()
>> exten=1998,n,Playback(rpt/node)
>> exten=1998,n,Playback(digits/1)
>> exten=1998,n,Playback(digits/6)
>> exten=1998,n,Playback(digits/2)
>> exten=1998,n,Playback(digits/0)
>> exten=1998,n,rpt(1998|P)
>> 
>> I assumed that there was someplace that something similar was defined for the connections.
>> 
>> I don't have a /var/lib/asterisk/rpt folder, nevermind a nodenames subfolder. so I'm guessing I have to create them.. I didn't see the folder so I thought the BBB might be different.  I'll try it out.
>> 
>> Thanks to you both.
>> 
>> 
>> 
>> 
>> Regards,
>> Mike Montalvo, KF7MBK
>> ARA Membership Chair
>> www.w7ara.org
>> 
>> 
>> 
>> 
>> 
>> 
>>> On Tue, Jul 14, 2015 at 8:22 AM, Doug Crompton <doug at crompton.com> wrote:
>>> Mike,
>>> 
>>>  The BBB is no different than Acid in that regard. The connect messages are made up of Alison text put together to form a message on the fly. This is done in the code and not changeable without a source code mod and recompile.  If you go into the Asterisk client - asterisk -rvvv - and do a connect or disconnect you will see in the log how the individual snippets are put together to form the message.
>>> 
>>> As was mentioned in an earlier message if you put a pre-recorded  audio file with the nodenumber that is connecting as the filename in the nodenames directory it will play that connect message instead. Since you are recording the message it can say anything you want. The RPi2 and 1.2.1 BBB versions have goggle text to speech built-in and you could either use that or your own voice to create a message.
>>> 
>>> 73 Doug
>>> WA3DSP
>>> http://www.crompton.com/hamradio
>>> 
>>> 
>>> From: kf7mbk at w7ara.net
>>> Date: Tue, 14 Jul 2015 07:21:10 -0700
>>> To: app_rpt-users at ohnosec.org
>>> Subject: Re: [App_rpt-users] Removing the connection message
>>> 
>>> 
>>> I suppose I should say this is on a BBB with v1.  The connection message I am talking about is dynamic, it's not a recording, at least not the whole thing.
>>> 
>>> 
>>> Regards,
>>> Mike Montalvo, KF7MBK
>>> ARA Membership Chair
>>> www.w7ara.org
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> On Tue, Jul 14, 2015 at 7:04 AM, Corey Dean <n3fe at repeater.net> wrote:
>>> It is the file name that exists under /var/lib/asterisk/rpt/nodenames.  Just have a audio file created for your nose and it should play.
>>> 
>>> Corey
>>> 
>>> On Jul 14, 2015, at 9:50 AM, Mike M <kf7mbk at w7ara.net> wrote:
>>> 
>>> Where is it that I can change what is played when creating a link between two (private) nodes?  I'm trying to change the 'Node xxx connected to node yyy. Trancieve" announcement but can't seem to find that anywhere.
>>> 
>>> Thanks.
>>> 
>>> Regards,
>>> Mike Montalvo, KF7MBK
>>> ARA Membership Chair
>>> www.w7ara.org
>>> 
>>> 
>>> 
>>> 
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>> 
>>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>> 
>>> 
>>> _______________________________________________ App_rpt-users mailing list App_rpt-users at ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150714/e53fdc72/attachment.html>