[App_rpt-users] Removing the connection message

[Mike M]

Oh i was just poking around and found it.

var/lib/asterisk/*sounds*/rpt/nodenames


Regards,
Mike Montalvo, KF7MBK
ARA Membership Chair
www.w7ara.org






On Tue, Jul 14, 2015 at 3:27 PM, Mike M <kf7mbk at w7ara.net> wrote:

> Thanks Doug.  There are some snippets I've seen in say, extensions.conf
> that you can see the announcement is pieced together.
>
> exten=1998,1,answer()
> exten=1998,n,Playback(rpt/node)
> exten=1998,n,Playback(digits/1)
> exten=1998,n,Playback(digits/6)
> exten=1998,n,Playback(digits/2)
> exten=1998,n,Playback(digits/0)
> exten=1998,n,rpt(1998|P)
>
> I assumed that there was someplace that something similar was defined for
> the connections.
>
> I don't have a /var/lib/asterisk/rpt folder, nevermind a nodenames
> subfolder. so I'm guessing I have to create them.. I didn't see the folder
> so I thought the BBB might be different.  I'll try it out.
>
> Thanks to you both.
>
>
>
>
> Regards,
> Mike Montalvo, KF7MBK
> ARA Membership Chair
> www.w7ara.org
>
>
>
>
>
>
> On Tue, Jul 14, 2015 at 8:22 AM, Doug Crompton <doug at crompton.com> wrote:
>
>> Mike,
>>
>>  The BBB is no different than Acid in that regard. The connect messages
>> are made up of Alison text put together to form a message on the fly. This
>> is done in the code and not changeable without a source code mod and
>> recompile.  If you go into the Asterisk client - asterisk -rvvv - and do a
>> connect or disconnect you will see in the log how the individual snippets
>> are put together to form the message.
>>
>> As was mentioned in an earlier message if you put a pre-recorded  audio
>> file with the nodenumber that is connecting as the filename in the
>> nodenames directory it will play that connect message instead. Since you
>> are recording the message it can say anything you want. The RPi2 and 1.2.1
>> BBB versions have goggle text to speech built-in and you could either use
>> that or your own voice to create a message.
>>
>>
>>
>> *73 DougWA3DSPhttp://www.crompton.com/hamradio
>> <http://www.crompton.com/hamradio>*
>>
>>
>> ------------------------------
>> From: kf7mbk at w7ara.net
>> Date: Tue, 14 Jul 2015 07:21:10 -0700
>> To: app_rpt-users at ohnosec.org
>> Subject: Re: [App_rpt-users] Removing the connection message
>>
>>
>> I suppose I should say this is on a BBB with v1.  The connection message
>> I am talking about is dynamic, it's not a recording, at least not the whole
>> thing.
>>
>>
>> Regards,
>> Mike Montalvo, KF7MBK
>> ARA Membership Chair
>> www.w7ara.org
>>
>>
>>
>>
>>
>>
>> On Tue, Jul 14, 2015 at 7:04 AM, Corey Dean <n3fe at repeater.net> wrote:
>>
>> It is the file name that exists under /var/lib/asterisk/rpt/nodenames.
>> Just have a audio file created for your nose and it should play.
>>
>> Corey
>>
>> On Jul 14, 2015, at 9:50 AM, Mike M <kf7mbk at w7ara.net> wrote:
>>
>> Where is it that I can change what is played when creating a link between
>> two (private) nodes?  I'm trying to change the 'Node xxx connected to node
>> yyy. Trancieve" announcement but can't seem to find that anywhere.
>>
>> Thanks.
>>
>> Regards,
>> Mike Montalvo, KF7MBK
>> ARA Membership Chair
>> www.w7ara.org
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>> _______________________________________________ App_rpt-users mailing
>> list App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe
>> from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button" You do not need a password to
>> unsubscribe, you can do it via email confirmation. If you have trouble
>> unsubscribing, please send a message to the list detailing the problem.
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150714/38ac5fc5/attachment.html>