[App_rpt-users] Two nodes one server

[Steve Agee]

Normally, all nodes on one server use the same port. Now if you have a 
second server, THEN you would need a different port number.

N5ZUA

On 7/15/2015 8:23 PM, Robert Newberry wrote:
>
> Currently have one node on the air. I'm working on a second node on 
> the same server. I know I need to have the second node specified for 
> another port. I found this link, but I'm not exactly clear on it. 
> http://www.asteriskdocs.org/en/2nd_Edition/asterisk-book-html-chunk/asterisk-APP-A-SECT-1.html
>
> Could anyone give me a nudge in the right direction.
>
> Thank you
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150715/b0e66af8/attachment.html>