[App_rpt-users] usbradio CTCSS problems

[Buddy Brannan]

I think carrier from should be DSP. 

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194 
Mobile: 814-431-0962
Email: buddy at brannan.name




> On Jun 3, 2015, at 4:49 AM, Luis Ceja Quiroz <lcejaqui at ucsc.edu> wrote:
> 
> Hello, I'm trying to configure my node to use the ctcss tone of the repeater, but whenever I set rxctcssfreqs to my ctcss frequency, or any frequency, Asterisk crashes. What am I doing wrong?  Heres a sample:
> 
> hdwtype=0
> rxboost=0
> txboost=1
> rxctcssrelax=1
> txctcssdefault=94.8
> rxctcssfreqs=94.8
> txctcssfreqs=94.8
> rxctcssoverride=1
> carrierfrom=no
> ctcssfrom=dsp
> rxdemod=flat
> txprelim=yes
> txlimonly=no
> txtoctype=notone
> txmixa=composite
> txmixb=composite
> invertptt=0
> duplex=0
> rxondelay=0
> rxnoisefiltype=0
> eeprom=0
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.