[App_rpt-users] use of an IP phone to monitor my node

[Tim Sawyer]

You don’t even have to have a radio. I have a ZAP/Dummy node on my home PBX that I dial into to monitor our repeaters.

Probably don’t need a trunk if your SIP phone is on the same LAN with your home PBX/node. You can just *3 to any node you want to go to. 
--
Tim
:wq

> On Jun 10, 2015, at 6:43 AM, Pete M <petem001 at hotmail.com> wrote:
> 
> Why did I did not think of it?
> 
> And I could run a small simplex node at the same time..
> 
> Got a few uv-3r that are doing nothing and at 500 mw on the tx side it wont be that bad for my other use of the vhf or uhf band, wich ever I choose to use..
> 
> 
> 
> Now still need to do a trunk or not?
> 
> cause I could hook up my sip phone to my simplex node that would also be linked to my repeater..
> 
> Humm got to read a bit about this
> 
> 
> -----Message d'origine----- From: Tim Sawyer
> Sent: Wednesday, June 10, 2015 8:50 AM
> To: Pete M
> Cc: APP RPT
> Subject: Re: [App_rpt-users] use of an IP phone to monitor my node
> 
> ACID, of course. It makes a fine home PBX.
> --
> Tim
> :wq
> 
>> On Jun 10, 2015, at 5:36 AM, Pete M <petem001 at hotmail.com> wrote:
>> 
>> Anyone here could tell me what would be a good distro for such a small system at home?
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.