[App_rpt-users] Codecs

[Tim Sawyer]

Assuming you can’t use iLbc because you’re not using a BBB or RPi or you want connections to ACID nodes, GSM is probably your best option for low bandwidth connections. Both ends have to allow it. The order is important, first match wins. Like so...

[general]
bindaddr=0.0.0.0                                                                
disallow=all                                                                    
allow=gsm                    
allow=g726aal2    
…
                                                              
--
Tim
:wq

> On Jun 21, 2015, at 8:25 AM, Loren Tedford <lorentedford at gmail.com> wrote:
> 
> Question what is the lowest codec one should use for allstar?
> 
> 
> If some one could list all the codecs and how they work in iax.conf or sip.conf that would be great example lets say i wish to use speex narrow band what would that be allow=Speex?? I tried it didnt work anythoughts suggestions by the way my repeater site has free internet but the internet can be really awful at times thats why i am looking for lower codecs to use..
> 
> here is some thing i found off the internet its a picture of different codecs but not sure exactly how i would tell the config file to use them or if i have to do anything special to use the codec..
> http://i.stack.imgur.com/E93uL.png <http://i.stack.imgur.com/E93uL.png>
> 
> <E93uL.png>
> ​
> 
> 
> Loren Tedford (KC9ZHV) 
> Email: lorentedford at gmail.com <mailto:lorentedford at gmail.com>
> Phone: 618-553-0806
> http://www.lorentedford.com <http://www.lorentedford.com/>
> http://www.kc9zhv.com <http://www.kc9zhv.com/>
> http://hub.kc9zhv.com <http://hub.kc9zhv.com/>_______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150621/095439ea/attachment.html>