[App_rpt-users] homebrew USB sound fob no RX audio

[Steve Agee]

The "meas=25995" indicates the node is seeing discriminator audio, 
although just a tad bit low in level. So, it is making it in OK. Can you 
elaborate on what conditions you have established for the menu item 4 test?

N5ZUA

On 3/2/2015 7:25 AM, Skyler F wrote:
> First I am using the Baofeng radio for the second node, and using 
> speaker audio, which I understand is not the best, but I am hoping I 
> can at least get it to work.
>
> Second, I hit menu 2 /Auto detect RX noise level:/
> /
> /
> *Tries=6, setting=563, meas=25995, sqnoise=168.*
> *
> *
> Now I hit menu 4 Auto detect CTCSS with carrier and CTCSS
>
> And this is where I have issuees
> *Setting = 8.00 meas=0.00*
> *RX CTCSS GAIN ADJUST FAILED*
> *
> *
> I also tried it with speaker audio instead of flat, but I still 
> couldn't get it to work. I remember at some point while listening on 
> the web transceiver a tiny bit of audio came through but nothing 
> really is getting through since.
>
> Thanks,
> Skyler
>
>
>
> On Sun, Mar 1, 2015 at 10:59 PM, Steve Agee <n5zua at earthlink.net 
> <mailto:n5zua at earthlink.net>> wrote:
>
>     From the CLI, make sure you have correct CM108 fob selected (if
>     more than one is hooked up) and run CLI> "radio tune rxnoise"
>     without the quotation marks, with the receiver sending
>     discriminator audio to the fob, and you should be seeing around
>     28000 as the level coming in. Call me if you need more help. You
>     already have my number.
>
>     N5ZUA
>
>
>     On 3/1/2015 9:23 PM, Skyler F wrote:
>
>         I made the modification to the startech CM108 sound fob. This
>         is for a second node on the same machine. Everything should be
>         working, the node is transmitting with audio and PTT is
>         activating properly.
>
>         The receive should be working too, I plugged it in to my
>         macbook and was able to hear the white noise just fine and I
>         could hear my voice when I keyed up.
>
>         I also had Jeremy W0JRL help with everything on the software,
>         and we tried about everything from Flat audio to speaker audio
>         to COR to CTCSS but still no receive audio coming through the
>         network, it isn't detecting anything when I am transmitting
>         from my node radio to the node.
>
>         I was on the phone with him for almost two hours trying
>         anything we could think of, I did anything hardware, and he
>         modified anything software, but we still got no audio through
>         the network. We even turned off the squelch and there was a
>         dead carrier through the network.
>
>         Is there something wrong compatibility wise with this fob? I
>         did everything in the instructions and I got it from here
>         http://www.newegg.com/Product/Product.aspx?Item=N82E16829128002.
>
>         I used this instruction manual
>         http://www.repeater-builder.com/projects/fob/USB-Fob-Construction.pdf
>
>         If this is a compatibility issue, it is sure a weird one
>         because the Txaudio worked fine.
>
>         Is there a way to tell if any audio at all is coming in to
>         AllStar?
>
>         What can I try next to troubleshoot?
>
>
>         73
>         Skyler KDØWHB
>
>         -- 
>         Skyler Fennell
>         amsatnet.info <http://amsatnet.info> <http://amsatnet.info>
>         KDØWHB
>         electricity440 at gmail.com <mailto:electricity440 at gmail.com>
>         <mailto:electricity440 at gmail.com
>         <mailto:electricity440 at gmail.com>>
>
>
>         _______________________________________________
>         App_rpt-users mailing list
>         App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>         To unsubscribe from this list please visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and
>         scroll down to the bottom of the page. Enter your email
>         address and press the "Unsubscribe or edit options button"
>         You do not need a password to unsubscribe, you can do it via
>         email confirmation. If you have trouble unsubscribing, please
>         send a message to the list detailing the problem.
>
>
>
>
>
> -- 
> Skyler Fennell
> amsatnet.info <http://amsatnet.info>
> KDØWHB
> electricity440 at gmail.com <mailto:electricity440 at gmail.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150302/9de8e90b/attachment.html>