[App_rpt-users] homebrew USB sound fob no RX audio

[Skyler F]

>
> Did I read correctly that you are trying to use Baofeng speaker audio +
> USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS from the RX
> before it hits the speaker.  A little may still leak through, but not
> enough to work.  Look on the web and you will/may find mods to pick off the
> carrier detect on the Baofeng.  This will give you the detection you need.

There aren't any mods that I could find and people told me the speaker
output is on the chip itself.

Can I use the RX CTCSS on the radio and use COR?

On Mon, Mar 2, 2015 at 10:03 AM, Mike Zingman <mike.zingman at gmail.com>
wrote:

> Skyler,
>
> Did I read correctly that you are trying to use Baofeng speaker audio +
> USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS from the RX
> before it hits the speaker.  A little may still leak through, but not
> enough to work.  Look on the web and you will/may find mods to pick off the
> carrier detect on the Baofeng.  This will give you the detection you need.
>
> If I have this wrong, never mind ;-)
>
>
> On Mon, Mar 2, 2015 at 10:32 AM, Skyler F <electricity440 at gmail.com>
> wrote:
>
>> ACID
>>
>> On Mon, Mar 2, 2015 at 8:28 AM, Kevin Custer <kuggie at kuggie.com> wrote:
>>
>>> On 3/2/2015 10:25 AM, Skyler F wrote:
>>>
>>>> USBradio
>>>>
>>>> Dell desktop with pentium 4
>>>>
>>>> I will check the version when I get a chance but there is so much
>>>> custom built stuff on it, upgrading would probably destroy it. It is from
>>>> julyish 2014
>>>>
>>>
>>> Sorry - When I asked for the version of distribution, I meant ACID or
>>> XIPAR?
>>>
>>>
>>
>>
>> --
>> Skyler Fennell
>> amsatnet.info
>> KDØWHB
>> electricity440 at gmail.com
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>


-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150302/b2df5f59/attachment.html>