[App_rpt-users] homebrew USB sound fob no RX audio

[Skyler F]

Also, that is the reason why I picked such a high frequency tone in the
200's. I am sure that 200 hertz has to get through at least a little bit

On Mon, Mar 2, 2015 at 11:56 AM, Skyler F <electricity440 at gmail.com> wrote:

> Did I read correctly that you are trying to use Baofeng speaker audio +
>> USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS from the RX
>> before it hits the speaker.  A little may still leak through, but not
>> enough to work.  Look on the web and you will/may find mods to pick off the
>> carrier detect on the Baofeng.  This will give you the detection you need.
>
> There aren't any mods that I could find and people told me the speaker
> output is on the chip itself.
>
> Can I use the RX CTCSS on the radio and use COR?
>
> On Mon, Mar 2, 2015 at 10:03 AM, Mike Zingman <mike.zingman at gmail.com>
> wrote:
>
>> Skyler,
>>
>> Did I read correctly that you are trying to use Baofeng speaker audio +
>> USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS from the RX
>> before it hits the speaker.  A little may still leak through, but not
>> enough to work.  Look on the web and you will/may find mods to pick off the
>> carrier detect on the Baofeng.  This will give you the detection you need.
>>
>> If I have this wrong, never mind ;-)
>>
>>
>> On Mon, Mar 2, 2015 at 10:32 AM, Skyler F <electricity440 at gmail.com>
>> wrote:
>>
>>> ACID
>>>
>>> On Mon, Mar 2, 2015 at 8:28 AM, Kevin Custer <kuggie at kuggie.com> wrote:
>>>
>>>> On 3/2/2015 10:25 AM, Skyler F wrote:
>>>>
>>>>> USBradio
>>>>>
>>>>> Dell desktop with pentium 4
>>>>>
>>>>> I will check the version when I get a chance but there is so much
>>>>> custom built stuff on it, upgrading would probably destroy it. It is from
>>>>> julyish 2014
>>>>>
>>>>
>>>> Sorry - When I asked for the version of distribution, I meant ACID or
>>>> XIPAR?
>>>>
>>>>
>>>
>>>
>>> --
>>> Skyler Fennell
>>> amsatnet.info
>>> KDØWHB
>>> electricity440 at gmail.com
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a message to
>>> the list detailing the problem.
>>>
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KDØWHB
> electricity440 at gmail.com
>



-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150302/b96f697a/attachment.html>