[App_rpt-users] App_rpt-users Digest, Vol 73, Issue 7

Tue Mar 3 01:10:30 UTC 2015

David,

That makes sense.  Thanks for the info.  See you in a couple of months.

Cole
AA7RD

-----Original Message-----
From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of
app_rpt-users-request at ohnosec.org
Sent: Monday, March 02, 2015 5:29 PM
To: app_rpt-users at ohnosec.org
Subject: App_rpt-users Digest, Vol 73, Issue 7

Send App_rpt-users mailing list submissions to
	app_rpt-users at ohnosec.org

To subscribe or unsubscribe via the World Wide Web, visit
	http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
or, via email, send a message with subject or body 'help' to
	app_rpt-users-request at ohnosec.org

You can reach the person managing the list at
	app_rpt-users-owner at ohnosec.org

When replying, please edit your Subject line so it is more specific than
"Re: Contents of App_rpt-users digest..."

Today's Topics:

   1. Re: Using a private node (David McGough)
   2. Re: homebrew USB sound fob no RX audio (Skyler F)
   3. Re: homebrew USB sound fob no RX audio (Skyler F)

----------------------------------------------------------------------

Message: 1
Date: Mon, 2 Mar 2015 15:41:50 -0500 (EST)
From: David McGough <kb4fxc at inttek.net>
To: AllStar Link <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] Using a private node
Message-ID:
	<Pine.LNX.4.44.1503021537270.26681-100000 at goliath.inttek.net>
Content-Type: TEXT/PLAIN; charset=US-ASCII

Hi Cole,

You can't directly connect from the AllStarlink.org web transceiver to a
private node. However, you can setup a public gateway (or hub) node which
can see your private nodes. Then, connect to the hub via the web
transceiver. Then, connect the hub node to your private nodes. I do this all
the time.

And, private node numbers are 1* (like 1000 or 12345), not 2*.

73, David KB4FXC

On Mon, 2 Mar 2015, Cole Cunningham wrote:

> I've found all the information needed to set up a private node except 
> how to use it from the internet.  The Web transceiver from 
> allstarlink.org wants you to chose a node from their list.  If I make 
> a private node, is it possible to use the web transceiver or something 
> similar to access and use the node?  Or can you only use a private 
> node from another node by using the connect commands?
> 
>  
> 
> Also, do I understand correctly that node numbers in the 2000 range 
> are private?  If so, how is access restricted?  I tried the test node 
> 2002 and connected with no problem, just like a public node.
> 
>  
> 
> Cole, AA7RD
> 
> 

------------------------------

Message: 2
Date: Mon, 2 Mar 2015 13:53:15 -0700
From: Skyler F <electricity440 at gmail.com>
To: Mike Zingman <mike.zingman at gmail.com>,
	"app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] homebrew USB sound fob no RX audio
Message-ID:
	<CAJNyT0-iH7m9ys4yiEJjwFCYiw6rQxufDP2QcOa-4TuPcMQMDw at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

Is there COR for the modified USB fob?

On Monday, March 2, 2015, Skyler F <electricity440 at gmail.com> wrote:

> Ok I will look into that. I'm waiting on getting a friends broken uv5r 
> where the audio knob doesn't work so I can use that I don't want to 
> take apart the one that works fine.
>
> On Monday, March 2, 2015, Mike Zingman <mike.zingman at gmail.com 
> <javascript:_e(%7B%7D,'cvml','mike.zingman at gmail.com');>> wrote:
>
>> No, it lights weather CTCSS is correct or not. I bet the uv5r has the 
>> same audio chip as the 888 On Mar 2, 2015 3:04 PM, "Skyler F" 
>> <electricity440 at gmail.com> wrote:
>>
>>> Would the green light work as a COR point? I don't know where COR is 
>>> on the UV5R.
>>>
>>> On Mon, Mar 2, 2015 at 12:04 PM, Mike Zingman 
>>> <mike.zingman at gmail.com>
>>> wrote:
>>>
>>>> Yes, that is what we did.
>>>>
>>>> 1) set radio for RX CTCSS
>>>> 2) connect audio from FOB to fixed audio from the audio pot.
>>>> 3) use COR from radio.  We use the 888 ( mods here may help:
>>>> http://w0fcm.com/allstar-portable-node/ )
>>>>
>>>> On Mon, Mar 2, 2015 at 1:56 PM, Skyler F <electricity440 at gmail.com>
>>>> wrote:
>>>>
>>>>> Did I read correctly that you are trying to use Baofeng speaker 
>>>>> audio
>>>>>> + USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS 
>>>>>> + from the RX
>>>>>> before it hits the speaker.  A little may still leak through, but 
>>>>>> not enough to work.  Look on the web and you will/may find mods 
>>>>>> to pick off the carrier detect on the Baofeng.  This will give you
the detection you need.
>>>>>
>>>>> There aren't any mods that I could find and people told me the 
>>>>> speaker output is on the chip itself.
>>>>>
>>>>> Can I use the RX CTCSS on the radio and use COR?
>>>>>
>>>>> On Mon, Mar 2, 2015 at 10:03 AM, Mike Zingman 
>>>>> <mike.zingman at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Skyler,
>>>>>>
>>>>>> Did I read correctly that you are trying to use Baofeng speaker 
>>>>>> audio
>>>>>> + USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS 
>>>>>> + from the RX
>>>>>> before it hits the speaker.  A little may still leak through, but 
>>>>>> not enough to work.  Look on the web and you will/may find mods 
>>>>>> to pick off the carrier detect on the Baofeng.  This will give you
the detection you need.
>>>>>>
>>>>>> If I have this wrong, never mind ;-)
>>>>>>
>>>>>>
>>>>>> On Mon, Mar 2, 2015 at 10:32 AM, Skyler F 
>>>>>> <electricity440 at gmail.com>
>>>>>> wrote:
>>>>>>
>>>>>>> ACID
>>>>>>>
>>>>>>> On Mon, Mar 2, 2015 at 8:28 AM, Kevin Custer <kuggie at kuggie.com>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> On 3/2/2015 10:25 AM, Skyler F wrote:
>>>>>>>>
>>>>>>>>> USBradio
>>>>>>>>>
>>>>>>>>> Dell desktop with pentium 4
>>>>>>>>>
>>>>>>>>> I will check the version when I get a chance but there is so 
>>>>>>>>> much custom built stuff on it, upgrading would probably 
>>>>>>>>> destroy it. It is from julyish 2014
>>>>>>>>>
>>>>>>>>
>>>>>>>> Sorry - When I asked for the version of distribution, I meant 
>>>>>>>> ACID or XIPAR?
>>>>>>>>
>>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> --
>>>>>>> Skyler Fennell
>>>>>>> amsatnet.info
>>>>>>> KD?WHB
>>>>>>> electricity440 at gmail.com
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> App_rpt-users mailing list
>>>>>>> App_rpt-users at ohnosec.org
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>>>
>>>>>>> To unsubscribe from this list please visit 
>>>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and 
>>>>>>> scroll down to the bottom of the page. Enter your email address 
>>>>>>> and press the "Unsubscribe or edit options button"
>>>>>>> You do not need a password to unsubscribe, you can do it via 
>>>>>>> email confirmation. If you have trouble unsubscribing, please 
>>>>>>> send a message to the list detailing the problem.
>>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Skyler Fennell
>>>>> amsatnet.info
>>>>> KD?WHB
>>>>> electricity440 at gmail.com
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Skyler Fennell
>>> amsatnet.info
>>> KD?WHB
>>> electricity440 at gmail.com
>>>
>>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
> <javascript:_e(%7B%7D,'cvml','electricity440 at gmail.com');>
>
>

--
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20150302/0504badc/at
tachment-0001.html>

------------------------------

Message: 3
Date: Mon, 2 Mar 2015 17:28:43 -0700
From: Skyler F <electricity440 at gmail.com>
To: Mike Zingman <mike.zingman at gmail.com>,
	"app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
Subject: Re: [App_rpt-users] homebrew USB sound fob no RX audio
Message-ID:
	<CAJNyT0-rvRS8RzGeHfE6Y-KXdR-0-mfPz5nriKNVZi8hGVjL1Q at mail.gmail.com>
Content-Type: text/plain; charset="utf-8"

I have a question and a possible clue to the issue
*Question:*
Would a Dell dimension 8400 with a pentium 4 processer be able to handle two
nodes at once? For the most part, the first node will only be connected to
the second node and the second node will connect to remote nodes.

*Possible clue to issue*
So I was in the radio-tune-menu option number four, the CTCSS detection.  I
first did it on node Number 1 and it worked fine just like always. I then
tried it on node number 2 and it didn't work and everything was 0. Then I
tried it with node number 1 but the USB devices swapped. Node 1 worked, and
node 2 didn't. So there is something wrong where no CTCSS will get detected
and it is always 0. Here is my USBRADIO.conf

;
; Usbradio channel driver Configuration File ;

[general]

[usb40764]

hdwtype=0
rxboost=1
txboost=1
rxctcssrelax=1
txctcssdefault=103.5
rxctcssfreqs=103.5
txctcssfreqs=103.5
;rxctcssoverride=0
carrierfrom=dsp
ctcssfrom=dsp
rxdemod=flat
txprelim=yes
txlimonly=no
txtoctype=phase
txmixa=composite
txmixb=no
invertptt=0
duplex=0
rxondelay=30
rxnoisefiltype=0
eeprom=0

;gpio=out1

gpio1 = out0         ; in, out0 or out1
gpio2 = out0
gpio4 = in        ; in, out0 or out1

[usb41694]

hdwtype=0
rxboost=1
txboost=0
rxctcssrelax=1
txctcssdefault=100.0
rxctcssfreqs=100.0
txctcssfreqs=100.0
;rxctcssoverride=0
carrierfrom=usbinvert
ctcssfrom=usbinvert
rxdemod=flat
txprelim=no
txlimonly=no
txtoctype=notone

On Mon, Mar 2, 2015 at 1:04 PM, Skyler F <electricity440 at gmail.com> wrote:

> Would the green light work as a COR point? I don't know where COR is 
> on the UV5R.
>
> On Mon, Mar 2, 2015 at 12:04 PM, Mike Zingman <mike.zingman at gmail.com>
> wrote:
>
>> Yes, that is what we did.
>>
>> 1) set radio for RX CTCSS
>> 2) connect audio from FOB to fixed audio from the audio pot.
>> 3) use COR from radio.  We use the 888 ( mods here may help:
>> http://w0fcm.com/allstar-portable-node/ )
>>
>> On Mon, Mar 2, 2015 at 1:56 PM, Skyler F <electricity440 at gmail.com>
>> wrote:
>>
>>> Did I read correctly that you are trying to use Baofeng speaker 
>>> audio +
>>>> USBRadio in order to decode CTCSS?  The Baofeng filters CTCSS from 
>>>> the RX before it hits the speaker.  A little may still leak 
>>>> through, but not enough to work.  Look on the web and you will/may 
>>>> find mods to pick off the carrier detect on the Baofeng.  This will
give you the detection you need.
>>>
>>> There aren't any mods that I could find and people told me the 
>>> speaker output is on the chip itself.
>>>
>>> Can I use the RX CTCSS on the radio and use COR?
>>>
>>> On Mon, Mar 2, 2015 at 10:03 AM, Mike Zingman 
>>> <mike.zingman at gmail.com>
>>> wrote:
>>>
>>>> Skyler,
>>>>
>>>> Did I read correctly that you are trying to use Baofeng speaker 
>>>> audio + USBRadio in order to decode CTCSS?  The Baofeng filters 
>>>> CTCSS from the RX before it hits the speaker.  A little may still 
>>>> leak through, but not enough to work.  Look on the web and you 
>>>> will/may find mods to pick off the carrier detect on the Baofeng.  This
will give you the detection you need.
>>>>
>>>> If I have this wrong, never mind ;-)
>>>>
>>>>
>>>> On Mon, Mar 2, 2015 at 10:32 AM, Skyler F 
>>>> <electricity440 at gmail.com>
>>>> wrote:
>>>>
>>>>> ACID
>>>>>
>>>>> On Mon, Mar 2, 2015 at 8:28 AM, Kevin Custer <kuggie at kuggie.com>
>>>>> wrote:
>>>>>
>>>>>> On 3/2/2015 10:25 AM, Skyler F wrote:
>>>>>>
>>>>>>> USBradio
>>>>>>>
>>>>>>> Dell desktop with pentium 4
>>>>>>>
>>>>>>> I will check the version when I get a chance but there is so 
>>>>>>> much custom built stuff on it, upgrading would probably destroy 
>>>>>>> it. It is from julyish 2014
>>>>>>>
>>>>>>
>>>>>> Sorry - When I asked for the version of distribution, I meant 
>>>>>> ACID or XIPAR?
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Skyler Fennell
>>>>> amsatnet.info
>>>>> KD?WHB
>>>>> electricity440 at gmail.com
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visit 
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and 
>>>>> scroll down to the bottom of the page. Enter your email address 
>>>>> and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email 
>>>>> confirmation. If you have trouble unsubscribing, please send a 
>>>>> message to the list detailing the problem.
>>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Skyler Fennell
>>> amsatnet.info
>>> KD?WHB
>>> electricity440 at gmail.com
>>>
>>
>>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
>

--
Skyler Fennell
amsatnet.info
KD?WHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://ohnosec.org/pipermail/app_rpt-users/attachments/20150302/d4528fcd/at
tachment.html>

------------------------------

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

End of App_rpt-users Digest, Vol 73, Issue 7
********************************************