[App_rpt-users] Show IP address

[Luke Rohn]

Hello Steve,

Thanks for pointing me in the right direction.

I just ran asterisk -R as you suggested and it put me into the command line
interface.

I then ran the original command and it worked like a charm.

Thank you very much, I appreciate it. I am learning more about Allstar each
day and it has been fun!

Is exit the proper command to end (CLI)?

73,

Luke

On Wed, Mar 11, 2015 at 11:13 PM, Steve Agee <n5zua at earthlink.net> wrote:

>  Luke,
>
> Most of the Linux system commands are run from the root command prompt you
> have listed. Most of the Allstar / app_rpt commands are run from the
> Asterisk Command Line Interface (CLI). Such is the case with 'rpt lstats
> 28806' so to get to the CLI from the root command prompt, first type
> [root at KK7XX ~]# asterisk -R
>
> N5ZUA
>
> On 3/12/2015 1:09 AM, Luke Rohn wrote:
>
> Hello Tim,
>
>  I am relatively new to Allstar, having just got it up and running for
> less than a week now. I have access to the computer I am running Allstar on
> only through SSH. After logging in I tried the command you posted:
>
>  *CLI> rpt lstats <yournode>
>
>  And I am not having any luck.
>
>  This is what what I am getting:
>
>  [root at KK7XX ~]# rpt lstats 28806
>
> -bash: rpt: command not found
>
> [root at KK7XX ~]#
>  At this point, I am not sure if I am using the command correctly, or
> else this command is performed from some sort of web interface that I am
> not aware of yet. I almost think it is the later after looking at the image
> you have attached below.
>
>  I appreciate the help you offer and thanks for sharing your knowledge of
> Allstar.
>
>  Best regards,
>
>  Luke
>
>
> On Tue, Mar 10, 2015 at 12:41 PM, Tim Sawyer <tim.sawyer at mac.com> wrote:
>
>> *CLI> rpt lstats <yournode>
>>
>>  Or use Allmon...
>>
>>
>>  --
>> Tim
>> :wq
>>
>>   On Mar 10, 2015, at 11:40 AM, Robert Newberry <N1XBM at amsat.org> wrote:
>>
>>    I wrote it down a while back but now have lost my notes. I've tried
>> google and I must be using the wrong terms.
>>
>> Is there a way to show the IP addresses of the nodes connected to my
>> node? I thought it could be done from the CLI?
>>
>> Thank you
>>   _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>> down to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a message to
>> the list detailing the problem.
>>
>
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150311/f1e335ea/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 94290 bytes
Desc: not available
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150311/f1e335ea/attachment.png>