[App_rpt-users] Multiple Repeaters Per Site

[kk6ecm]

see http://ohnosec.org/drupal/node/49

 

we have a 3 node system setup... just expand the concept discussed in the
referenced URL

 

Bob

kk6ecm

  _____  

From: app_rpt-users-bounces at ohnosec.org
[mailto:app_rpt-users-bounces at ohnosec.org] On Behalf Of R. Wayne
Sent: Friday, March 20, 2015 8:11 AM
To: Allstar
Subject: [App_rpt-users] Multiple Repeaters Per Site

 

As we continue to grow we are committed to using Allstar. But we are already
at a loss as to how to put multiple repeaters on the air from the same site.
Sure, we can use multiple URI's I think and a single PC. But we prefer
RTCM's and they cost $$$. The real question is the use of external
controllers like an Arcom RC-210. They have 3 ports plus a 4th basic port.
We have 2m, 440 and 900, plus a WX receiver.  URI's are cheaper but if we do
the PC approach can we declare separate config files/directories, or would
we need to install something like OpenVZ and mount each USB device in
separate containers? PC's at remote sites concern me especially without
redundant power supplies. A RC-210 would allow the use of only one RTCM and
the ports would be linked to through the RC-210. One node number for three
repeaters, although that isn't my preference. How much audio delay could be
expected using an external controller?

 

Thank you in advance.

 

Wayne

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150320/81f72101/attachment.html>