[App_rpt-users] App_rpt-users Digest, Vol 73, Issue 36

Mon Mar 23 01:38:47 UTC 2015

Ok changed from speaker to flat. Now i have the other settings are
renabled.
Now when i use selection #9 it tells me Error: Rx voice gain adjust failed.
Selection #2  it says
Error: Rx input adjust failed
#5 is set to 200
Selection #4 adjusted
Now when audio comes in it cycles on and off while trying to talk
especially when on the repeater. Any other ideas????

*Christopher W. Fuselier-- KF5NSA*
*Vice President-- S.A.R.C.*
*Sulphur Amateur Radio Club*
*Cell: 337-842-6554*
*KF5NSA at gmail.com* <KF5NSA at gmail.com>

On Sun, Mar 22, 2015 at 11:00 AM, <app_rpt-users-request at ohnosec.org> wrote:

> Send App_rpt-users mailing list submissions to
>         app_rpt-users at ohnosec.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> or, via email, send a message with subject or body 'help' to
>         app_rpt-users-request at ohnosec.org
>
> You can reach the person managing the list at
>         app_rpt-users-owner at ohnosec.org
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of App_rpt-users digest..."
>
>
> Today's Topics:
>
>    1. URI-X no rx set0ings (Christopher Fuselier)
>    2. Re: allmon2 setup Login issues (Tim Sawyer)
>    3. Re: URI-X no rx set0ings (Skyler F)
>    4. Mifi (Robert Newberry)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 21 Mar 2015 21:58:40 -0500
> From: Christopher Fuselier <kf5nsa at gmail.com>
> To: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: [App_rpt-users] URI-X no rx set0ings
> Message-ID:
>         <
> CAF99joK2Z8FiyjvEzOKQ2k4eKPTCEyzkKRSi48x8bpYzKE-j1g at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Have a URI-X  on my allstar node. When i run radio-tune-menu it gives me no
> options to set the RX. i have been having a  problem with the uri not
> hearing any Rx... checked the radio and all is good. it used to give me
> this option for the RX then it just stop all of a sudden and cant make it
> come back. has great TX just RX problem,,,, REALLY NEED HELP ON THIS
> PROBLEM... . .......
>
>
>
>
>
>
>
> *Christopher W. Fuselier-- KF5NSA*
> *Vice President-- SARC*
> *Cell: 337-842-6554 <337-842-6554>*
> *KF5NSA at gmail.com* <KF5NSA at gmail.com>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20150321/12b0de82/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 2
> Date: Sat, 21 Mar 2015 20:00:42 -0700
> From: Tim Sawyer <tim.sawyer at mac.com>
> To: Loren Tedford <lorentedford at gmail.com>
> Cc: app_rpt mailing list <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] allmon2 setup Login issues
> Message-ID: <3F3C0E64-1B46-4987-A6A6-78BDEC910264 at mac.com>
> Content-Type: text/plain; charset="us-ascii"
>
> The .htpasswd file must remain in the same directory where you put allmon.
> The file is created with the Apache utility called htpasswd. The syntax is
> shown below.
>
> for example: htpasswd -c .htpasswd admin
>
> then pick a password.
>
> [root at wd6awp allmon]# htpasswd ?
> Usage:
>         htpasswd [-cmdpsD] passwordfile username
>         htpasswd -b[cmdpsD] passwordfile username password
>
>         htpasswd -n[mdps] username
>         htpasswd -nb[mdps] username password
>  -c  Create a new file.
>  -n  Don't update file; display results on stdout.
>  -m  Force MD5 encryption of the password.
>  -d  Force CRYPT encryption of the password (default).
>  -p  Do not encrypt the password (plaintext).
>  -s  Force SHA encryption of the password.
>  -b  Use the password from the command line rather than prompting for it.
>  -D  Delete the specified user.
> On Windows, NetWare and TPF systems the '-m' flag is used by default.
> On all other systems, the '-p' flag will probably not work.
> --
> Tim
> :wq
>
> > On Mar 21, 2015, at 2:31 PM, Loren Tedford <lorentedford at gmail.com>
> wrote:
> >
> > Hi everyone its Loren here again.. I am trying to setup Allmon2 well
> actually i think for the most part i have it setup other than i can not
> login into the thing I have done just about everything i could think of
> anyone have any suggestions and what is the proper way to setup the
> password side of things i have the .htpasswd file located in a different
> folder than allmon does that make a difference i did change the function
> line under login.php maybei have missed some thing but just need some
> random thoughts on what i could have done wrong any and all thoughts are
> appreciated
> >
> >
> > Loren Tedford (KC9ZHV)
> > Email: lorentedford at gmail.com <mailto:lorentedford at gmail.com>
> >
> > http://www.lorentedford.com <http://www.lorentedford.com/>
> > http://www.Ltcraft.net <http://www.ltcraft.net/>
> > http://www.richlandcountycomputers.com <
> http://www.richlandcountycomputers.com/>
> > http://kc9zhv.lorentedford.com <http://kc9zhv.lorentedford.com/>
> > http://newwavesucks.com <http://newwavesucks.com/>
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20150321/e2d5fd42/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 3
> Date: Sun, 22 Mar 2015 06:52:27 -0600
> From: Skyler F <electricity440 at gmail.com>
> To: Christopher Fuselier <kf5nsa at gmail.com>
> Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org>
> Subject: Re: [App_rpt-users] URI-X no rx set0ings
> Message-ID:
>         <
> CAJNyT0-0WxECbUC8zBbtCAZ5jmjRYoKrHsMhXMz4F4ozZkR8uA at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Go to /etc/asterisk/usbradio.conf and make sure rxdemod=flat not
> rxdemod=speaker
>
> On Sat, Mar 21, 2015 at 8:58 PM, Christopher Fuselier <kf5nsa at gmail.com>
> wrote:
>
> > Have a URI-X  on my allstar node. When i run radio-tune-menu it gives me
> > no options to set the RX. i have been having a  problem with the uri not
> > hearing any Rx... checked the radio and all is good. it used to give me
> > this option for the RX then it just stop all of a sudden and cant make it
> > come back. has great TX just RX problem,,,, REALLY NEED HELP ON THIS
> > PROBLEM... . .......
> >
> >
> >
> >
> >
> >
> >
> > *Christopher W. Fuselier-- KF5NSA*
> > *Vice President-- SARC*
> > *Cell: 337-842-6554 <337-842-6554>*
> > *KF5NSA at gmail.com* <KF5NSA at gmail.com>
> >
> > _______________________________________________
> > App_rpt-users mailing list
> > App_rpt-users at ohnosec.org
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> >
> > To unsubscribe from this list please visit
> > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
> down
> > to the bottom of the page. Enter your email address and press the
> > "Unsubscribe or edit options button"
> > You do not need a password to unsubscribe, you can do it via email
> > confirmation. If you have trouble unsubscribing, please send a message to
> > the list detailing the problem.
> >
>
>
>
> --
> Skyler Fennell
> amsatnet.info
> KD?WHB
> electricity440 at gmail.com
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20150322/bd49eb0b/attachment-0001.html
> >
>
> ------------------------------
>
> Message: 4
> Date: Sun, 22 Mar 2015 10:20:45 -0400
> From: Robert Newberry <N1XBM at amsat.org>
> To: app_rpt-users at ohnosec.org
> Subject: [App_rpt-users] Mifi
> Message-ID:
>         <CAM09xEaEyyAgCE5D3YnVe7RDFuFnz_aqwLVRi=
> S0A+td2SX3Pg at mail.gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Does anyone have any experience with mifi units? I am looking at ways to
> get internet at remote sites. I was looking at some prepaid units but what
> I've seen the data you buy is only good for 60-90 days. I'd prefer
> something like a year or no expiration. I've also read they can be a bear
> with setting up a port forward. Ideally I'd want to have the allstar and
> ssh ports opened up. I have also not explored adding a mifi to my current
> cellular plan.
>
> To add to this does anyone have any idea for a test how I could measure
> bandwidth on one of my nodes for 30 days so I can get a real idea of how
> much bandwidth we would need to actually purchase.
>
> Thank you
> Bob/N1XBM
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://ohnosec.org/pipermail/app_rpt-users/attachments/20150322/b0fbf5e4/attachment-0001.html
> >
>
> ------------------------------
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>
> End of App_rpt-users Digest, Vol 73, Issue 36
> *********************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150322/34bc8825/attachment.html>