[App_rpt-users] help please ....

[Robert A. Poff]

I would think that your problem is more that of receiver audio response. Or level.

The most trouble is with 2/3 and 5/6?

You seem to be having trouble decoding the second and third column tones.

Does the receive level set routine report success?


On March 24, 2015 7:29:31 AM EDT, Keith Verrall <arisaig99 at googlemail.com> wrote:
>Hi 
>I am attempting to set up an Allstar node(s) 41748 and 41749, I am
>using an
>Acid install cd iso downloaded from Allstar website, setting up onto  a
>via
>cn1000 motherboard 
>with 1gb ram and a 4gb Disc on Module (previously used as IRLP node
>5228 ) I
>have purchased a URIx (no eeprom) from dmk and have connected to a
>motorola
>gm300 with an active low cos line the radio controls the ctss access on
>88.5, initially until I discovered that I had to select usb invert my
>node
>would not respond  nor show dtmf char(s) in asterisk cli. However since
>inverting usb (in usbradio.conf) my node will respond to dtmf tones  Š
>but
>and here is my problem it will not ³hear² 2, 3, and 6 and, 5 is
>sometimes
>will sometimes won¹t clearly I messed something up in the install so I
>reinstalled via the allstar portal yet the problem remains, its not the
>radio I have tried 4 different radios with same results I can connect
>from
>the web transceiver to my node and send dtmf code all of which do work,
>and
>are transmitted to from my node radio Š. My linux experience is very
>limited
>Š. But learning  :)  I can spell it.. but seems the pronunciation can
>lead
>to argument..
>
>If someone could give me some pointers I would be extremely grateful
>
>Regards Keith 2M0SBP / MB7IAR
>
>
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem. 

-- 
Sent from my Android device with K-9 Mail. Please excuse my brevity.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150324/4ced22f5/attachment.html>