[App_rpt-users] Changing audio level of link

[Jeff Carrier]

Is every different node you connect to is much too low?  If so I'd guess
that you have your audio level too hot.  How did you set your RX and TX
levels?

On Fri, Mar 27, 2015 at 4:34 PM, Andy Wittman <kk4zkp at gmail.com> wrote:

> Hello All,
>
> I am curious to know if there is a setting I can adjust to increase the
> volume of audio coming in from a link. My rx and tx levels are good, when
> turning on parrot mode everything sounds great, but when I link in to a
> repeater, the incoming audio is very low. On the other side of the
> conversation I receive good audio reports from my side.
>
> I am using a simplex node running on the BBB with a Baofeng 888. I
> switched it and my HT to WFM but the linked audio is still very low.
>
> Thanks in advance,
> Andy
> KK4ZKP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150327/7ee8235c/attachment.html>