[App_rpt-users] RTCM with GPS

Bryan Fields bryan at bryanfields.net
Sat May 2 00:43:36 UTC 2015


Also, check that the port it's on is set to 10/half. The RTCM is very unforgiving of network misconfiguration and does not do auto negotiation. 

--
Bryan Fields, W9CR 
(not a CCIE; too busy actually building networks)

On May 1, 2015 7:18:46 PM EDT, Chuck Henderson <rpt2 at chuck.midlandsnetworking.com> wrote:
>I don't think that you said, but I will assume that you are using the
>Garmin GPS and that you have it located where it has a clear view of
>the
>sky and that you have it cabled correctly and with the correct
>settings, up
>to date firmware in the RTCM, etc...  Most likely IMHO, you have a
>network
>problem on your Ethernet or your network between your RTCM and your
>computer.  I have found that if there are lots of errors, collisions,
>re-transmissions and the such on the network, the RTCM just looses
>track of
>the GPS.  Fix the network problem and the GPS will mysteriously start
>working great.
>Chuck Henderson, CCIE2285, WB9UUS
>
>
>On Fri, May 1, 2015 at 5:39 PM, Jeff Carrier <k0jsc.jeff at gmail.com>
>wrote:
>
>> Ok i've had pretty wide variation of replies.  When I see GPS drop
>and
>> restore on the console it always indicates 10 satellites in view. 
>I'm
>> assuming the RTCM is looking for 10.
>>
>> On Fri, May 1, 2015 at 3:06 PM, Mike Tubby <mike at tubby.org> wrote:
>>
>>>
>>> For a 2D fix you need a minimum of 3 satellites
>>> For a 3D fix you need a minimum of 4 satellites
>>>
>>> Beyond this "more is better".
>>>
>>> HTH
>>>
>>> Mike G8TIC
>>>
>>>
>>> On 01/05/2015 20:41, Jeff Carrier wrote:
>>>
>>> Does anyone know how many satellites are required for a good GPS
>lock.  I
>>> keep losing lock which is causing me to lose the system.
>>>
>>>
>>>  K0JSC
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing
>listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem.
>>>
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>>> down to the bottom of the page. Enter your email address and press
>the
>>> "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email
>>> confirmation. If you have trouble unsubscribing, please send a
>message to
>>> the list detailing the problem.
>>>
>>
>>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down
>> to the bottom of the page. Enter your email address and press the
>> "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email
>> confirmation. If you have trouble unsubscribing, please send a
>message to
>> the list detailing the problem.
>>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>App_rpt-users mailing list
>App_rpt-users at ohnosec.org
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
>To unsubscribe from this list please visit
>http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll
>down to the bottom of the page. Enter your email address and press the
>"Unsubscribe or edit options button"
>You do not need a password to unsubscribe, you can do it via email
>confirmation. If you have trouble unsubscribing, please send a message
>to the list detailing the problem. 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150501/67f8014f/attachment.html>


More information about the App_rpt-users mailing list