[App_rpt-users] MASTR III

[Tim Sawyer]

Please elaborate on ‘really nasty’. Is it the RX side or the TX side?
--
Tim
:wq

> On May 7, 2015, at 8:42 PM, Jeff Carrier <k0jsc.jeff at gmail.com> wrote:
> 
> I don't want this to sound like a dumb question and I've searched all over with really no luck.  I've also tried several things but I'm looking for "clean" audio.  I've done this a million times on Motorolas so why doesn't this work on a GE?  Does anyone have experience with an RTCM and a MASTR III?  I have tried to inject audio into every point I can find in the manual and can't make it sound "right."  There is a good write up on repeater builder about interfacing a controller with an M III but when I follow that it sound REAL NASTY.  Any tips would be greatly appreciated.
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150508/77fc5295/attachment.html>