[App_rpt-users] Any HOWTO on setting up a hub node?

[Pete M]

I can tell you that it is a chram to do..

Made a node on Debian jessie in a few hour last saturday.


-----Message d'origine----- 
From: Steve Zingman
Sent: Thursday, May 14, 2015 11:25 AM
To: app_rpt-users at ohnosec.org
Subject: [App_rpt-users] Any HOWTO on setting up a hub node?

Steve,
See  <https://github.com/N4IRS/AllStar/raw/master/linode.tar>
Should give you what you need.

See <https://github.com/N4IRS/AllStar> for more general stuff.

73, Steve N4IRS

>> I would like to set up a hub for several repeater nodes. Is there a
how to describing this? TIA ____________
>> Steven Donegan
>> KK6IVC FCC General Class License
>> SSCC/NORC Life Member, Car #86
>> www.sscc.us

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit 
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to 
the bottom of the page. Enter your email address and press the "Unsubscribe 
or edit options button"
You do not need a password to unsubscribe, you can do it via email 
confirmation. If you have trouble unsubscribing, please send a message to 
the list detailing the problem.