[App_rpt-users] Hf remote base

[mike at midnighteng.com]

Well,
I don't think there is a way to control the squelch,
so to control COR you use the VOX setting/carrierfrom=dsp(usbradio) &
duplex=0(rpt.conf).

authlevel = 0 : Anyone can use it
; authlevel = 1 : Requires log in, Waits for Tx key to ask for it
; authlevel = 2 : Requires log in, asks for it automously

See
http://ohnosec.org/drupal/search/node/remote%20base

You can use a 706mkii but not a original 706 as the command set that is
issued to the radio was written specific to the mkii and will not work on
the original 706 without error.

...mike/kbjnm

> I was reading about hf remote bases on the internet. There doesn't seem to
> be a lot of information out there on it. I did see the thr IC-706 and
> FT-897 are supported. I have the 897 and it really doesn't get much use. I
> think this would be a great way to get more use out of it.
>
> Does anyone on this list currently do this? How do you control the
> squelch?
> Are you using an auto tuner? Or fixed frequency.  Also I read you can
> create access control to prevent unauthorized use.
>
> N1XBM
> Apparare Scientor
> Paratus Communicare
> Allstar Node # 27086, 41540, 41812
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down
> to the bottom of the page. Enter your email address and press the
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email
> confirmation. If you have trouble unsubscribing, please send a message to
> the list detailing the problem.