[App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install

[Neil k8it]

From: Neil k8it 
Sent: Monday, May 25, 2015 11:06 PM
To: Justin Harris 
Cc: app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install


yes you are correct
dev is wlan0
kernel is 2.6.18-404.e15PAE on an i686


From: Justin Harris 
Sent: Monday, May 25, 2015 10:48 PM
To: Neil k8it 
Cc: <app_rpt-users at ohnosec.org> 
Subject: Re: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install


Usually the interface name for wireless devices is wlan0, wlan1, etc. It isn't so much about the version of Linux as it is the Kernel version you are running and if it has native support for your hardware. As far as getting wireless working once you have the appropriate driver is called a "wireless connection manager". One that comes to mind is called wicd. Hope this helps a bit. 

Take care, 
Justin Harris
KG7FKJ

On May 25, 2015, at 7:28 PM, Neil k8it <k8it at cac.net> wrote:


  Well I figure if I report what I have learned someone may know an answer

  Centos v5.11
  WIFI Intel NIC 52657LM
  here is a link to configuring it in Centos v5.11     http://linuxcommando.blogspot.com/2013/10/how-to-connect-to-wpawpa2-wifi-network.html
  dev lan0 is currently not "UP"
  trying to follow the instructions to bring it "UP" results in a Firmware request failure which most likely means
  the driver is not present and needs to be loaded.
  so I'm searching for a linux driver for this intel 52657LM NIC
  anybody have one that will run under centos v5.11

  thanks Neil k8it allstar node 41838 or echolink k8it-L




  From: Neil k8it 
  Sent: Monday, May 25, 2015 3:41 PM
  To: app_rpt-users at ohnosec.org 
  Subject: [App_rpt-users] how to configure Centos ACID for wifi not hardwireafter install


  I got ACID installed using a hardwire internet connection.
  Now I need to eliminate the hardwire connection and use the internal wireless NIC card in the pc box. I need to have the ssid and network password and gateway adddresses setup so when acid boots asterisk the network is logged into. how do I do this with acid / centos?
  thanks
  73 Neil K8IT
  Allstar node 41838 or Echolink k8it-L



------------------------------------------------------------------------------


  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 


------------------------------------------------------------------------------


  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15

  _______________________________________________
  App_rpt-users mailing list
  App_rpt-users at ohnosec.org
  http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

  To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
  You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 
No virus found in this message.
Checked by AVG - www.avg.com
Version: 2015.0.5941 / Virus Database: 4347/9865 - Release Date: 05/25/15
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20150525/010cdd6b/attachment.html>