[App_rpt-users] Warning line in /var/log/asterisk messages file

[Steve Zingman]

permit=/255.255.255.255
change to
; permit=/255.255.255.255

On 11/01/2015 02:17 PM, Dave Newmyer wrote:
> Thanks Steve:
>
> Here are the screen shots from nano:
>
>
>
>   GNU nano 2.2.6                      File: iax.conf
>
> ; Inter-Asterisk eXchange driver definition
> ;
> ;
>
> [general]
> bindport=4569
> bindaddr=0.0.0.0
> disallow=all
> allow=gsm
> allow=g726aal2
> allow=ulaw
> jitterbuffer=yes
> forcejitterbuffer=yes
> dropcount=2
> maxjitterbuffer=4000
> maxjitterinterps=10
> resyncthreshold=1000
> maxexcessbuffer=80
> minexcessbuffer=10
> jittershrinkrate=1
> tos=0x1E
> autokill=yes
> delayreject=yes
> ;iaxthreadcount=30
> ;iaxmaxthreadcount=150
>
> register=28781:261397 at register.allstarlink.org
>
> [radio-proxy]
> type=user
> deny=0.0.0.0/0.0.0.0
> permit=/255.255.255.255
> context=radio-secure-proxy
> disallow=all
> allow=g726aal2
> transfer=no
>
>
> [radio-proxy-out]
> type=peer
> host=
> username=28781
> secret=261397
> auth=md5
> disallow=all
> allow=g726aal2
> transfer=no
>
>
> ; Incoming radio connections
>
>
> [radio]
> type=user
> disallow=all
> allow=g726aal2
> allow=gsm
> codecpriority=host
> context=radio-secure
> transfer=no
>
> ; Incoming phone connections to app_rpt
>
> ;[radio-control]
> ;type=user
> ;secret=nunya
> ;disallow=all
> ;allow=gsm
> ;codecpriority=host
> ;context=radio-control
> ;transfer=no
>
> ; Setup for outgoing calls
>
> ;[yourprovider]         ; This needs to change
> ;type=peer
> ;host=127.0.0.1
> ;secret=nunya
> ;auth=md5
> ;disallow=all
> ;allow=gsm
> ;transfer=no
>
> [allstar-sys]
> type=user
> context=allstar-sys
> auth=rsa
> inkeys=allstar
> disallow=all
> allow=ulaw
>
> [allstar-public]
> type=user
> context=allstar-public
> auth=md5
> secret=allstar
> disallow=all
> allow=ulaw
> allow=gsm
>
> #includeifexists custom/iax.conf
>
>
>
>
>                                            [ Read 100 lines ]
> ^G Get Help      ^O WriteOut      ^R Read File     ^Y Prev Page ^K Cut 
> Text      ^C Cur Pos
> ^X Exit          ^J Justify       ^W Where Is      ^V Next Page ^U 
> UnCut Text    ^T To Spell
>
>
>
> On 11/1/2015 12:01 PM, Steve Zingman wrote:
>> Dave,
>> Enable echolink in /etc/asterisk/modules
>>
>> error is in iax.conf
>> I dont have a downloaded config handy.
>>
>> look for a line that has /0.0.0.0
>>
>> Sorry I can't be more specific.
>>
>> If you post your iax.conf I can tell you what it is.
>>
>> 73, Steve N4IRS
>>
>>
>> On 11/01/2015 01:54 PM, Dave Newmyer wrote:
>>> I'm seeing the following line occurring:
>>>
>>> WARNING[675] acl.c: is not a valid IP
>>>
>>>
>>> Any suggestions as to where I should look to resolve this?
>>>
>>>
>>> On a side note, since moving from ACID to DIAL, I am not seeing my 
>>> Echolink node being active on the echolink.org site.
>>>
>>> Have set the system.conf file echolinkenable=1
>>>
>>> echolink.conf file seems to be OK.
>>>
>>> 73,
>>>
>>> Dave N
>>>
>>> N0KM
>>>
>>>
>>>
>>> ---
>>> This email has been checked for viruses by Avast antivirus software.
>>> https://www.avast.com/antivirus
>>>
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit 
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>>> down to the bottom of the page. Enter your email address and press 
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email 
>>> confirmation. If you have trouble unsubscribing, please send a 
>>> message to the list detailing the problem. 
>>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
>

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic