[App_rpt-users] Remote Base Timeout

[Steve Zingman]

Jamey,
What are your settings for:

remote_inact_timeout
remote_timeout

73, Steve N4IRS

On 11/08/2015 10:18 PM, Jamey Wright wrote:
>
> I have a 2M remote base (TM-271) running on a node here.  How can I 
> change the activity timeout?  There have been several instances where 
> I have been actively using the node and I get an activity timeout 
> message.  First it will announce timeout in 180 seconds.  If I do 
> anything like change power level, frequency, etc, it then announces 
> activity timeout in 3597 seconds, then about 15 seconds later 
> announces activity timeout in 3604 seconds and continues to announce 
> activity timeout every 30 seconds or so.  Disconnecting and 
> reconnecting is the only way to stop the countdown.
>
> Thanks
>
> Jamey
>
> WR4JW
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151109/2e74777b/attachment.html>