[App_rpt-users] Echolink Setting

[Jamey Wright]

Here is a snip from rpt.conf

[41902]					; Change this to your assigned node number 

rxchannel=Zap/pseudo
erxgain=-3
etxgain=3
eannmode=2
;controlstates=controlstates
scheduler=schedule41902

-----Original Message-----
From: Buddy Brannan [mailto:buddy at brannan.name] 
Sent: Tuesday, November 24, 2015 10:23 PM
To: Jamey Wright <jamey.wright at charter.net>
Subject: Re: [App_rpt-users] Echolink Setting

Hmm. Shouldn't matter. Where in the file did you put the statement? It should be in the section where you're defining your node. 

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194 
Mobile: 814-431-0962
Email: buddy at brannan.name




> On Nov 24, 2015, at 11:09 PM, Jamey Wright <jamey.wright at charter.net> wrote:
> 
> Yes, I did restart Asterisk.  BTW, my system is running ACID.
> 
> Jamey
> WR4JW
> 
> -----Original Message-----
> From: Buddy Brannan [mailto:buddy at brannan.name] 
> Sent: Tuesday, November 24, 2015 9:27 PM
> To: Jamey Wright <jamey.wright at charter.net>
> Subject: Re: [App_rpt-users] Echolink Setting
> 
> Dumb question:
> Did you remember to either restart asterisk or reload your rpt.conf file (rpt reload from the asterisk console, or asterisk -rx "rpt reload")? 
> 
> --
> Buddy Brannan, KB5ELV - Erie, PA
> Phone: 814-860-3194 
> Mobile: 814-431-0962
> Email: buddy at brannan.name
> 
> 
> 
> 
>> On Nov 24, 2015, at 10:20 PM, Jamey Wright <jamey.wright at charter.net> wrote:
>> 
>> Does the command “eannmode = x” only work in newer distributions such as DIAL?  I added this to the rpt.conf on my system as eannmode = 2 but connects are still announced as node number only.
>> 
>> 
>> Thanks
>> 
>> Jamey
>> WR4JW
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>> 
>> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
> 
>