[App_rpt-users] Help on the obvious please !

[Dan Hyman]

Thanks again Mike,   The issue with the web Transceiver is the use of JAVA.   Most machines will not run JAVA any longer because of the blizzard of security issues.
Hopefully someone will write a transceiver that does not use JAVA.  


> On Nov 25, 2015, at 11:37 AM, mike at midnighteng.com wrote:
> 
> 
> If you are looking to connect to nodes on the allstar network from your pc, use the
> web transceiver. That is what it was built for.
> 
> To set  iaxrpt up with a specific node outside of your nat, that node would need to
> set-up a path through their firewall to their nat.
> 
> iaxrpt was made for local network/nat. Not that it can't be conscrewed to do
> otherwise. But that requires specific set-up for the path for each willing
> participant. It is merely a "phone extension" as a iax software interface attaching
> to a pre-described iax port in asterisk.
> 
> ...mike/kb8jnm
> 
>> Thanks Mike,    I was trying to know if I can obtain this information for another
>> station (other than my own)  on the node list.
>> Say for example I want to use the iaxRpt client on my computer to connect to a node
>> far way like one of the Alaska nodes, is there a way to discover the settings for
>> that station to create an account is iaxRpt ?
>> 
>> Thanks for any help on this.  -Dan KM6HK
>> 
>> 
>>> On Nov 25, 2015, at 10:25 AM, mike at midnighteng.com wrote:
>>> 
>>> 
>>> Hostname = local ip or host name
>>> 
>>> User & pass = whatever you set-up in iax.conf
>>> ex:
>>> 
>>> [gui]
>>> type=user
>>> context=radio-gui  ;user
>>> username=gui
>>> auth=md5
>>> secret=PASS       ;pass
>>> host=dynamic
>>> disallow=all
>>> allow=gsm
>>> notransfer=yes
>>> 
>>> 
>>> Hope it helped a little.
>>> 
>>> ...mike/kb8jnm
>>> 
>>> 
>>>> I am not a guru on AllStar so need help on the obvious:
>>>> 
>>>> How do I obtain the following information for any given node on the system for
>>>> configuration of iaxRpt client? :
>>>> 
>>>> 
>>>> For iaxRpt I need:
>>>> 
>>>>       1;)  How do I obtain the IP address for any given node on the system?
>>>> 	2.) The host is IPaddress, right ?
>>>> 	3.) Username for that system
>>>> 	4.) Password for that system
>>>> 
>>>> For example, I am trying to configure iaxRp client t and need to know the
>>>> information and the host / username / password
>>>> 
>>>> From my own system I can get this dump:
>>>> Can I get this from any given user on the system -or-
>>>> Can I assume that  “allstar-public” with password of “allstar” is
>>>> universally installed ??
>>>> 
>>>> 
>>>> KM6HK*CLI> iax2 show users
>>>> Username         Secret                Authen           Def.Context      A/C
>>>> Codec Pref
>>>> gui              dan94025              000000000000002  radio-gui        No
>>>> Host
>>>> allstar-public   allstar               000000000000002  allstar-public   No
>>>> Host
>>>> allstar-sys      Key: allstar          000000000000004  allstar-sys      No
>>>> Host
>>>> radio            -no secret-           000000000000003  radio-secure     No
>>>> Host
>>>> 
>>>> 
>>>> 
>>>> 
>>>> _______________________________________________
>>>> App_rpt-users mailing list
>>>> App_rpt-users at ohnosec.org
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>> 
>>>> To unsubscribe from this list please visit
>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
>>>> bottom of the page. Enter your email address and press the "Unsubscribe or edit
>>>> options button"
>>>> You do not need a password to unsubscribe, you can do it via email confirmation.
>>>> If
>>>> you have trouble unsubscribing, please send a message to the list detailing the
>>>> problem.
>>> 
>>> 
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org> <mailto:App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>>
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>>
>>> 
>>> To unsubscribe from this list please visit
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>
>>> <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> and scroll down to
>>> the bottom of the page. Enter your email address and press the "Unsubscribe or
>>> edit options button"
>>> You do not need a password to unsubscribe, you can do it via email confirmation.
>>> If you have trouble unsubscribing, please send a message to the list detailing
>>> the problem.
>> 
>> 
> 
> 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151125/a28a129b/attachment.html>