[App_rpt-users] Audio detection circuit to generate 'COR'

[Steve Zingman]

Steve COR or actually RUS "Receiver Un Squelch" is available in that 
radio. You have to unsolder the shield to get to it.

73, Steve

On 10/6/2015 8:56 AM, Steven Donegan wrote:
> Well, it is a generic question - any radio without COR. The specific 
> model in my case is a UHF radio module model # SA-828U: 
> http://www.alibaba.com/product-detail/1W-5km-distance-SA828-U-uhf_60092524887.html?spm=a2700.7724857.29.62.Xbg6c5
> Steven Donegan
> KK6IVC General Class FCC License
> Silver State Car #86
> www.sscc.us
>
> ------------------------------------------------------------------------
> *From:* Skyler Fennell <electricity440 at gmail.com>
> *To:* Steven Donegan <donegan at donegan.org>
> *Cc:* app_rpt-users at ohnosec.org
> *Sent:* Tuesday, October 6, 2015 5:47 AM
> *Subject:* Re: [App_rpt-users] Audio detection circuit to generate 'COR'
>
> http://www.aaroncake.net/circuits/vidswitch.asp
>
> That might work, I use it for packet.
>
> What radio are you on?
>
> Sent from my iPhone
>
>
>
> On Oct 6, 2015, at 6:29 AM, Steven Donegan <donegan at donegan.org 
> <mailto:donegan at donegan.org>> wrote:
>
>> Does anyone have a circuit that will take audio from a radio and 
>> generate a pseudo COR signal for the URI-x? If so would you share the 
>> circuit diagram?
>>
>> TIA
>> Steven Donegan
>> KK6IVC General Class FCC License
>> Silver State Car #86
>> www.sscc.us <http://www.sscc.us/>
>> _______________________________________________
>> App_rpt-users mailing list
>> App_rpt-users at ohnosec.org <mailto:App_rpt-users at ohnosec.org>
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>
>> To unsubscribe from this list please visit 
>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>> down to the bottom of the page. Enter your email address and press 
>> the "Unsubscribe or edit options button"
>> You do not need a password to unsubscribe, you can do it via email 
>> confirmation. If you have trouble unsubscribing, please send a 
>> message to the list detailing the problem.
>
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151006/6293daa4/attachment.html>