[App_rpt-users] Audio detection circuit to generate 'COR'

[Steven Donegan]

Thanks Steve! I'll look into that as well.
 Steven Donegan
KK6IVC General Class FCC License
Silver State Car #86
www.sscc.us
      From: Steve Zingman <szingman at msgstor.com>
 To: Steven Donegan <donegan at donegan.org>; "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
Cc: "app_rpt-users at ohnosec.org" <app_rpt-users at ohnosec.org> 
 Sent: Tuesday, October 6, 2015 6:06 AM
 Subject: Audio detection circuit to generate 'COR'
   
 Steve COR or actually RUS "Receiver Un Squelch" is available in that radio. You have to unsolder the shield to get to it.
 
 73, Steve 
 
 

On 10/6/2015 8:56 AM, Steven Donegan wrote:
  
  Well, it is a generic question - any radio without COR. The specific model in my case is a UHF radio module model # SA-828U: http://www.alibaba.com/product-detail/1W-5km-distance-SA828-U-uhf_60092524887.html?spm=a2700.7724857.29.62.Xbg6c5    Steven Donegan
 KK6IVC General Class FCC License
 Silver State Car #86
 www.sscc.us 
      From: Skyler Fennell <electricity440 at gmail.com>
 To: Steven Donegan <donegan at donegan.org> 
 Cc: app_rpt-users at ohnosec.org 
 Sent: Tuesday, October 6, 2015 5:47 AM
 Subject: Re: [App_rpt-users] Audio detection circuit to generate 'COR'
   
   http://www.aaroncake.net/circuits/vidswitch.asp 
  That might work, I use it for packet. 
  What radio are you on? 
 Sent from my iPhone 
 
   
 On Oct 6, 2015, at 6:29 AM, Steven Donegan <donegan at donegan.org> wrote:
 
  
   Does anyone have a circuit that will take audio from a radio and generate a pseudo COR signal for the  URI-x? If so would you share the circuit diagram? 
  TIA   Steven Donegan
 KK6IVC General Class FCC License
 Silver State Car #86
 www.sscc.us   
  
 _______________________________________________
 App_rpt-users mailing list
 App_rpt-users at ohnosec.org
 http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
 
 To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
 You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a  message to the list detailing the problem.  
   
 
     
  
 _______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.  
 
 

  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151006/70cab927/attachment.html>