[App_rpt-users] DIAL with Broadcastify etc via ezstream
Steve Zingman
szingman at msgstor.com
Thu Oct 8 18:00:25 UTC 2015
Posted to:
<https://github.com/N4IRS/AllStar/tree/master/doc>
73, Steve N4IRS
On 10/08/2015 01:42 PM, Mark Johnston wrote:
> Not sure if you saw my post about that a while back, using ACID it was
> just much easier to install now, had to use a really old version of
> ezstream before with the acid setup.
> Now it works from the normal install that is available.
>
>
> apt-get install ezstream lame
>
> I enabled this: load => app_chanspy.so ; Listen to the audio
> of an active channel
> not sure if that mattered though, seemed like it would be important...
>
> add this below the first section of the rpt.conf for the node you want
> to broadcast.
>
> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s 8
> --bitwidth 16 - - | /usr/bin/ezstream -qvc /etc/ezstream1001.xml
>
> ;ezstream1001.xml
>
> <ezstream>
>
> <url>http://audio3.broadcastify.com:80/mountpoint-provided-by-broadcastify</url>
>
> <sourcepassword>feed-specific-password-not-same-as-website-login</sourcepassword>
>
> <format>MP3</format>
>
> <filename>stdin</filename>
>
> <stream_once>1</stream_once>
>
> <reconnect_tries>0</reconnect_tries>
>
> <svrinfoname>Description</svrinfoname>
>
> <svrinfourl>http://www.radioreference.com/</svrinfourl>
>
> <svrinfogenre>Amateur Radio</svrinfogenre>
>
> <svrinfodescription>Description</svrinfodescription>
>
> <svrinfobitrate>16</svrinfobitrate>
>
> <svrinfochannels>1</svrinfochannels>
>
> <svrinfosamplerate>22050</svrinfosamplerate>
>
> <svrinfopublic>1</svrinfopublic>
>
> </ezstream>
>
>
>
>
>
>
> "Got Root?"
>
> How many software engineers does it take to change a light bulb?
> *None. It's a hardware problem.*
>
>
> Unix is user friendly. It's just very particular about who it's
> friends are.
> WINDOWS: Will Install Needless Data On Whole System
> MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools
> Teenagers.
>
>
> A ntennas
> P oorly
> P laced
> L acks
> E ngineering
>
> The best way to accelerate a computer running Windows is at 9.81 m/s².
>
> /*_/"I get paid to support Windows, I use Linux to get work done."/_*/
>
>
> On Thu, Oct 8, 2015 at 10:33 AM, Steve Zingman <szingman at msgstor.com
> <mailto:szingman at msgstor.com>> wrote:
>
> Good to hear.
> It might be worth documenting what needs to be installed and any
> tweaks that need to be done.
>
> 73, Steve N4IRS
>
> On 10/08/2015 01:30 PM, Mark Johnston wrote:
>> it's streaming, I even did a reboot and it's live now - not sure
>> what the problem was, maybe something on their end...
>>
>> http://www.broadcastify.com/listen/feed/21348/web
>>
>> "Got Root?"
>>
>> How many software engineers does it take to change a light bulb?
>> *None. It's a hardware problem.*
>>
>>
>> Unix is user friendly. It's just very particular about who it's
>> friends are.
>> WINDOWS: Will Install Needless Data On Whole System
>> MICROSOFT: Most Intelligent Customers Realize Our Software Only
>> Fools Teenagers.
>>
>>
>> A ntennas
>> P oorly
>> P laced
>> L acks
>> E ngineering
>>
>> The best way to accelerate a computer running Windows is at 9.81
>> m/s².
>>
>> /*_/"I get paid to support Windows, I use Linux to get work
>> done."/_*/
>>
>>
>> On Thu, Oct 8, 2015 at 10:20 AM, Steve Zingman
>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>
>> Working as in streaming from the node or sending a audio file?
>>
>>
>> On 10/08/2015 01:19 PM, Mark Johnston wrote:
>>> it gave me a login error
>>>
>>> ezstream: Connection to
>>> http://audio3.broadcastify.com:80/wcms5pn74trz failed: Login
>>> failed
>>>
>>> ezstream: Exiting ...
>>>
>>>
>>> suddenly started working - not sure how/why though -
>>>
>>>
>>>
>>> "Got Root?"
>>>
>>> How many software engineers does it take to change a light bulb?
>>> *None. It's a hardware problem.*
>>>
>>>
>>> Unix is user friendly. It's just very particular about who
>>> it's friends are.
>>> WINDOWS: Will Install Needless Data On Whole System
>>> MICROSOFT: Most Intelligent Customers Realize Our Software
>>> Only Fools Teenagers.
>>>
>>>
>>> A ntennas
>>> P oorly
>>> P laced
>>> L acks
>>> E ngineering
>>>
>>> The best way to accelerate a computer running Windows is at
>>> 9.81 m/s².
>>>
>>> /*_/"I get paid to support Windows, I use Linux to get work
>>> done."/_*/
>>>
>>>
>>> On Thu, Oct 8, 2015 at 10:06 AM, Steve Zingman
>>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>
>>> can you send a audio file to broadcastify with the
>>> command line below?
>>>
>>>
>>> On 10/08/2015 01:00 PM, Mark Johnston wrote:
>>>>
>>>> outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16
>>>> -r -m m -s 8 --bitwidth 16 - - | /usr/bin/ezstream -qvc
>>>> /etc/ezstream1001.xml
>>>>
>>>>
>>>> This just started appearing
>>>>
>>>>
>>>> [Oct 8 09:35:48] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>> [Oct 8 09:35:50] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>> [Oct 8 09:35:52] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>> [Oct 8 09:35:54] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>> [Oct 8 09:35:56] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>> [Oct 8 09:35:58] ERROR[695] app_rpt.c: pipe() failed!
>>>>
>>>>
>>>> "Got Root?"
>>>>
>>>> How many software engineers does it take to change a
>>>> light bulb?
>>>> *None. It's a hardware problem.*
>>>>
>>>>
>>>> Unix is user friendly. It's just very particular about
>>>> who it's friends are.
>>>> WINDOWS: Will Install Needless Data On Whole System
>>>> MICROSOFT: Most Intelligent Customers Realize Our
>>>> Software Only Fools Teenagers.
>>>>
>>>>
>>>> A ntennas
>>>> P oorly
>>>> P laced
>>>> L acks
>>>> E ngineering
>>>>
>>>> The best way to accelerate a computer running Windows
>>>> is at 9.81 m/s².
>>>>
>>>> /*_/"I get paid to support Windows, I use Linux to get
>>>> work done."/_*/
>>>>
>>>>
>>>> On Thu, Oct 8, 2015 at 9:55 AM, Steve Zingman
>>>> <szingman at msgstor.com <mailto:szingman at msgstor.com>> wrote:
>>>>
>>>> Mark,
>>>> Your log is showing problems with sip and possibly
>>>> a sound fob.
>>>> I don't think you need app_ices
>>>>
>>>> Please post you outstreamcmd in rpt.conf
>>>>
>>>> you may want to disable the sip changes while
>>>> troubleshooting streaming.
>>>>
>>>> 73, Steve N4IRS
>>>>
>>>>
>>>>
>>>> On 10/08/2015 12:13 PM, Mark Johnston wrote:
>>>>> Anyone try setting this up yet?
>>>>> Used to use this with ACID just fine
>>>>> Installed ezstream, and Lame -
>>>>>
>>>>>
>>>>> shows it's running
>>>>>
>>>>> 1124 ? S 0:00 /bin/sh -c /usr/bin/lame
>>>>> --preset cbr 16 -r -m m -s 8 --bitwidth 16 - - |
>>>>> /usr/bin/ezstream -qvc /etc/ezstream1001.xml
>>>>>
>>>>>
>>>>> I enabled this module, thinking thats what it needed
>>>>>
>>>>> load => app_ices.so ; Encode and Stream via
>>>>> icecast and ices
>>>>>
>>>>>
>>>>>
>>>>> ;modules.conf
>>>>>
>>>>> autoload=no
>>>>>
>>>>>
>>>>> ; Applications
>>>>>
>>>>>
>>>>> noload => app_adsiprog.so ;Asterisk ADSI
>>>>> Programming Application
>>>>>
>>>>> noload => app_alarmreceiver.so ;Alarm Receiver for
>>>>> Asterisk
>>>>>
>>>>> noload => app_amd.so ;Answering Machine Detection
>>>>> Application
>>>>>
>>>>> load => app_authenticate.so ; Authentication
>>>>> Application
>>>>>
>>>>> noload => app_cdr.so ;Tell Asterisk to not
>>>>> maintain a CDR for
>>>>>
>>>>> noload => app_chanisavail.so ;Check channel
>>>>> availability
>>>>>
>>>>> noload => app_channelredirect.so ;Channel Redirect
>>>>>
>>>>> load => app_chanspy.so ;Listen to the audio of an
>>>>> active channel
>>>>>
>>>>> noload => app_controlplayback.so ;Control Playback
>>>>> Application
>>>>>
>>>>> noload => app_dahdibarge.so ;Barge in on channel
>>>>> application
>>>>>
>>>>> noload => app_dahdiras.so ;DAHDI RAS Application
>>>>>
>>>>> noload => app_dahdiscan.so ;Scan Zap channels
>>>>> application
>>>>>
>>>>> noload => app_db.so ;Database Access Functions
>>>>>
>>>>> load => app_dial.so ;Dialing Application
>>>>>
>>>>> noload => app_dictate.so ;Virtual Dictation Machine
>>>>>
>>>>> noload => app_directed_pickup.so ;Directed Call
>>>>> Pickup Application
>>>>>
>>>>> noload => app_directory.so ;Extension Directory
>>>>>
>>>>> noload => app_disa.so ;DISA (Direct Inward System
>>>>> Access) Appli
>>>>>
>>>>> noload => app_dumpchan.so ;Dump Info About The
>>>>> Calling Channel
>>>>>
>>>>> noload => app_echo.so ;Simple Echo Application
>>>>>
>>>>> load => app_exec.so ;Executes dialplan applications
>>>>>
>>>>> noload => app_externalivr.so ;External IVR
>>>>> Interface Application
>>>>>
>>>>> noload => app_festival.so ;Simple Festival Interface
>>>>>
>>>>> noload => app_flash.so ;Flash channel application
>>>>>
>>>>> noload => app_followme.so ;Find-Me/Follow-Me
>>>>> Application
>>>>>
>>>>> noload => app_forkcdr.so ;Fork The CDR into 2
>>>>> separate entities
>>>>>
>>>>> noload => app_getcpeid.so ;Get ADSI CPE ID
>>>>>
>>>>> noload => app_gps.so ;GPS interface module
>>>>>
>>>>> noload => app_hasnewvoicemail.so ;Indicator for
>>>>> whether a voice mailbox ha
>>>>>
>>>>> load => app_ices.so ;Encode and Stream via icecast
>>>>> and ices
>>>>>
>>>>> noload => app_image.so ;Image Transmission
>>>>> Application
>>>>>
>>>>> noload => app_lookupblacklist.so ;Look up
>>>>> Caller*ID name/number from black
>>>>>
>>>>> noload => app_lookupcidname.so ;Look up CallerID
>>>>> Name from local databas
>>>>>
>>>>> load => app_macro.so ;Extension Macros
>>>>>
>>>>> noload => app_meetme.so ;MeetMe conference bridge
>>>>>
>>>>> noload => app_milliwatt.so ;Digital Milliwatt
>>>>> (mu-law) Test Applicat
>>>>>
>>>>> noload => app_mixmonitor.so ;Mixed Audio
>>>>> Monitoring Application
>>>>>
>>>>> noload => app_morsecode.so ;Morse code
>>>>>
>>>>> noload => app_mp3.so ;Silly MP3 Application
>>>>>
>>>>> noload => app_nbscat.so ;Silly NBS Stream Application
>>>>>
>>>>> noload => app_page.so ;Page Multiple Phones
>>>>>
>>>>> noload => app_parkandannounce.so ;Call Parking and
>>>>> Announce Application
>>>>>
>>>>> load => app_playback.so ;Sound File Playback
>>>>> Application
>>>>>
>>>>> noload => app_privacy.so ;Require phone number to
>>>>> be entered, if n
>>>>>
>>>>> noload => app_queue.so ;True Call Queueing
>>>>>
>>>>> noload => app_radbridge.so ;Radio Bridging
>>>>> interface module
>>>>>
>>>>> noload => app_random.so ;Random goto
>>>>>
>>>>> noload => app_readfile.so ;Stores output of file
>>>>> into a variable
>>>>>
>>>>> noload => app_read.so ;Read Variable Application
>>>>>
>>>>> noload => app_realtime.so ;Realtime Data
>>>>> Lookup/Rewrite
>>>>>
>>>>> noload => app_record.so ;Trivial Record Application
>>>>>
>>>>> load => app_rpt.so ;Radio Repeater/Remote Base
>>>>> Application
>>>>>
>>>>> noload => app_sayunixtime.so ;Say time
>>>>>
>>>>> load => app_senddtmf.so ;Send DTMF digits Application
>>>>>
>>>>> noload => app_sendtext.so ;Send Text Applications
>>>>>
>>>>> noload => app_setcallerid.so ;Set CallerID
>>>>> Application
>>>>>
>>>>> noload => app_setcdruserfield.so ;CDR user field apps
>>>>>
>>>>> noload => app_settransfercapability.so ;Set ISDN
>>>>> Transfer Capability
>>>>>
>>>>> noload => app_sms.so ;SMS/PSTN handler
>>>>>
>>>>> noload => app_softhangup.so ;Hangs up the
>>>>> requested channel
>>>>>
>>>>> noload => app_speech_utils.so ;Dialplan Speech
>>>>> Applications
>>>>>
>>>>> noload => app_stack.so ;Stack Routines
>>>>>
>>>>> load => app_system.so ;Generic System() application
>>>>>
>>>>> noload => app_talkdetect.so ;Playback with Talk
>>>>> Detection
>>>>>
>>>>> noload => app_test.so ;Interface Test Application
>>>>>
>>>>> load => app_transfer.so ;Transfer
>>>>>
>>>>> noload => app_url.so ;Send URL Applications
>>>>>
>>>>> noload => app_userevent.so ;Custom User Event
>>>>> Application
>>>>>
>>>>> noload => app_verbose.so ;Send verbose output
>>>>>
>>>>> noload => app_voicemail.so ;Comedian Mail
>>>>> (Voicemail System)
>>>>>
>>>>> noload => app_waitforring.so ;Waits until first
>>>>> ring after time
>>>>>
>>>>> noload => app_waitforsilence.so ;Wait For Silence
>>>>>
>>>>> noload => app_while.so ;While Loops and
>>>>> Conditional Execution
>>>>>
>>>>> noload => app_zapateller.so ;Block Telemarketers
>>>>> with Special Informa
>>>>>
>>>>>
>>>>> ; CDR
>>>>>
>>>>>
>>>>> noload => cdr_csv.so ;Comma Separated Values CDR
>>>>> Backend
>>>>>
>>>>> noload => cdr_custom.so ;Customizable Comma
>>>>> Separated Values CDR
>>>>>
>>>>> noload => cdr_manager.so ;Asterisk Manager
>>>>> Interface CDR Backend
>>>>>
>>>>>
>>>>> ; Channels
>>>>>
>>>>>
>>>>> noload => chan_agent.so ;Agent Proxy Channel
>>>>>
>>>>> noload => chan_alsa.so ;ALSA Console Channel Driver
>>>>>
>>>>> noload => chan_beagle.so ;Beagleboard Radio
>>>>> Interface Channel Driver
>>>>>
>>>>> load => chan_dahdi.so ;DAHDI Telephony
>>>>>
>>>>> noload => chan_echolink.so ;echolink channel driver
>>>>>
>>>>> noload => chan_features.so ;Feature Proxy Channel
>>>>>
>>>>> noload => chan_gtalk.so ;Gtalk Channel Driver
>>>>>
>>>>> load => chan_iax2.so ;Inter Asterisk eXchange (Ver 2)
>>>>>
>>>>> load => chan_local.so ;Local Proxy Channel (Note:
>>>>> used internal
>>>>>
>>>>> noload => chan_oss.so ;
>>>>>
>>>>> noload => chan_phone.so ;
>>>>>
>>>>> load => chan_simpleusb.so ;Simple USB Radio
>>>>> Interface Channel Drive
>>>>>
>>>>> load => chan_sip.so ;Session Initiation Protocol
>>>>> (SIP)
>>>>>
>>>>> noload => chan_tlb.so ;TheLinkBox channel driver
>>>>>
>>>>> load => chan_usbradio.so ;USB Console Channel Driver
>>>>>
>>>>> noload => chan_usrp.so ;USRP Channel Module
>>>>>
>>>>> noload => chan_voter.so ;radio Voter channel driver
>>>>>
>>>>>
>>>>> ; Codecs
>>>>>
>>>>>
>>>>> ; CODEC AUDIO QUALITY BANDWIDTH (including IP
>>>>> and Ethernet headers)
>>>>>
>>>>> ; ULAW best 87 kilobits per second (kbps)
>>>>>
>>>>> ; ADPCM good 55 kbps
>>>>>
>>>>> ; GSM mediocre 36 kbps
>>>>>
>>>>> ; g726aal2
>>>>>
>>>>> ; ilbc
>>>>>
>>>>>
>>>>> load => codec_adpcm.so ;Adaptive Differential PCM
>>>>> Coder/Decoder
>>>>>
>>>>> load => codec_alaw.so ;A-law Coder/Decoder
>>>>>
>>>>> load => codec_a_mu.so ;A-law and Mulaw direct
>>>>> Coder/Decoder
>>>>>
>>>>> noload => codec_dahdi.so ;Generic DAHDI Transcoder
>>>>> Codec Translato
>>>>>
>>>>> load => codec_g726.so ;ITU G.726-32kbps G726
>>>>> Transcoder
>>>>>
>>>>> load => codec_gsm.so ;GSM Coder/Decoder
>>>>>
>>>>> load => codec_ulaw.so ;mu-Law Coder/Decoder
>>>>>
>>>>> noload => codec_ilbc.so
>>>>> ;http://en.wikipedia.org/wiki/Internet_Low_Bitrate_Codec
>>>>>
>>>>>
>>>>> ; Formats
>>>>>
>>>>>
>>>>> load => format_g723.so ;G.723.1 Simple Timestamp
>>>>> File Format
>>>>>
>>>>> load => format_g726.so ;Raw G.726
>>>>> (16/24/32/40kbps) data
>>>>>
>>>>> load => format_g729.so ;Raw G729 data
>>>>>
>>>>> load => format_gsm.so ;Raw GSM data
>>>>>
>>>>> load => format_h263.so ;Raw H.263 data
>>>>>
>>>>> load => format_h264.so ;Raw H.264 data
>>>>>
>>>>> load => format_ilbc.so ;Raw iLBC data
>>>>>
>>>>> noload => format_jpeg.so ;JPEG (Joint Picture
>>>>> Experts Group) Image
>>>>>
>>>>> load => format_pcm.so ;Raw/Sun uLaw/ALaw 8KHz
>>>>> (PCM,PCMA,AU), G.
>>>>>
>>>>> load => format_sln.so ;Raw Signed Linear Audio
>>>>> support (SLN)
>>>>>
>>>>> load => format_vox.so ;Dialogic VOX (ADPCM) File
>>>>> Format
>>>>>
>>>>> load => format_wav_gsm.so ;Microsoft WAV format
>>>>> (Proprietary GSM)
>>>>>
>>>>> load => format_wav.so ;Microsoft WAV format
>>>>> (8000Hz Signed Line
>>>>>
>>>>>
>>>>> ; Functions
>>>>>
>>>>>
>>>>> load => func_base64.so ;base64 encode/decode
>>>>> dialplan functions
>>>>>
>>>>> load => func_callerid.so ;Caller ID related
>>>>> dialplan function
>>>>>
>>>>> load => func_cdr.so ;CDR dialplan function
>>>>>
>>>>> load => func_channel.so ;Channel information
>>>>> dialplan function
>>>>>
>>>>> load => func_curl.so ;Load external URL
>>>>>
>>>>> load => func_cut.so ;Cut out information from a
>>>>> string
>>>>>
>>>>> load => func_db.so ;Database (astdb) related
>>>>> dialplan functi
>>>>>
>>>>> load => func_enum.so ;ENUM related dialplan functions
>>>>>
>>>>> load => func_env.so ;Environment/filesystem
>>>>> dialplan function
>>>>>
>>>>> load => func_global.so ;Global variable dialplan
>>>>> functions
>>>>>
>>>>> load => func_groupcount.so ;Channel group dialplan
>>>>> functions
>>>>>
>>>>> load => func_language.so ;Channel language
>>>>> dialplan function
>>>>>
>>>>> load => func_logic.so ;Logical dialplan functions
>>>>>
>>>>> load => func_math.so ;Mathematical dialplan function
>>>>>
>>>>> load => func_md5.so ;MD5 digest dialplan functions
>>>>>
>>>>> load => func_moh.so ;Music-on-hold dialplan function
>>>>>
>>>>> load => func_rand.so ;Random number dialplan function
>>>>>
>>>>> load => func_realtime.so ;Read/Write values from a
>>>>> RealTime reposi
>>>>>
>>>>> noload => func_sha1.so ;SHA-1 computation dialplan
>>>>> function
>>>>>
>>>>> noload => func_strings.so ;String handling
>>>>> dialplan functions
>>>>>
>>>>> noload => func_timeout.so ;Channel timeout
>>>>> dialplan functions
>>>>>
>>>>> noload => func_uri.so ;URI encode/decode dialplan
>>>>> functions
>>>>>
>>>>>
>>>>> ; PBX
>>>>>
>>>>>
>>>>> noload => pbx_ael.so ;Asterisk Extension Language
>>>>> Compiler
>>>>>
>>>>> load => pbx_config.so ;Text Extension Configuration
>>>>>
>>>>> noload => pbx_dundi.so ;Distributed Universal
>>>>> Number Discovery (
>>>>>
>>>>> noload => pbx_loopback.so ;Loopback Switch
>>>>>
>>>>> noload => pbx_realtime.so ;Realtime Switch
>>>>>
>>>>> noload => pbx_spool.so ;Outgoing Spool Support
>>>>>
>>>>>
>>>>> ; Resources
>>>>>
>>>>>
>>>>> load => res_adsi.so ;ADSI Resource
>>>>>
>>>>> noload => res_agi.so ;Asterisk Gateway Interface
>>>>> (AGI)
>>>>>
>>>>> noload => res_clioriginate.so ;Call origination
>>>>> from the CLI
>>>>>
>>>>> noload => res_convert.so ;File format conversion
>>>>> CLI command
>>>>>
>>>>> noload => res_crypto.so ;Cryptographic Digital
>>>>> Signatures
>>>>>
>>>>> load => res_features.so ;Call Features Resource
>>>>>
>>>>> load => res_indications.so ;Indications Resource
>>>>>
>>>>> noload => res_jabber.so ;AJI - Asterisk Jabber
>>>>> Interface
>>>>>
>>>>> noload => res_monitor.so ;Call Monitoring Resource
>>>>>
>>>>> noload => res_musiconhold.so ;Music On Hold Resource
>>>>>
>>>>> noload => res_smdi.so ;Simplified Message Desk
>>>>> Interface (SMDI)
>>>>>
>>>>> noload => res_snmp.so ;SNMP [Sub]Agent for Asterisk
>>>>>
>>>>> noload => res_speech.so ;Generic Speech
>>>>> Recognition API
>>>>>
>>>>>
>>>>> [global]
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> /var/log/asterisk/messages;
>>>>>
>>>>> [Oct 8 08:44:24] NOTICE[1278] cdr.c: CDR simple
>>>>> logging enabled.
>>>>>
>>>>> [Oct 8 08:44:24] NOTICE[1278] indications.c:
>>>>> Removed default indication country 'us'
>>>>>
>>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c:
>>>>> Ignoring switchtype
>>>>>
>>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c:
>>>>> Ignoring signalling
>>>>>
>>>>> [Oct 8 08:44:24] WARNING[1278] chan_dahdi.c:
>>>>> Ignoring rxwink
>>>>>
>>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c:
>>>>> Ignoring bindport on reload
>>>>>
>>>>> [Oct 8 08:44:24] NOTICE[1278] chan_iax2.c:
>>>>> Ignoring bindaddr on reload
>>>>>
>>>>> [Oct 8 08:44:25] WARNING[1278] acl.c: is not a
>>>>> valid IP
>>>>>
>>>>> [Oct 8 08:44:25] WARNING[714] chan_sip.c:
>>>>> insecure=very at line 31 is deprecated; use
>>>>> insecure=port,invite instead
>>>>>
>>>>> [Oct 8 08:47:46] NOTICE[683] cdr.c: CDR simple
>>>>> logging enabled.
>>>>>
>>>>> [Oct 8 08:47:46] NOTICE[683] loader.c: 56 modules
>>>>> will be loaded.
>>>>>
>>>>> [Oct 8 08:47:46] WARNING[683] acl.c: is not a
>>>>> valid IP
>>>>>
>>>>> [Oct 8 08:47:46] WARNING[683] acl.c: Unable to
>>>>> lookup 'callcentric.com <http://callcentric.com>'
>>>>>
>>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: No such
>>>>> host: callcentric.com <http://callcentric.com>
>>>>>
>>>>> [Oct 8 08:47:46] WARNING[714] chan_sip.c: Probably
>>>>> a DNS error for registration to
>>>>> 17772150287101 at callcentric.com
>>>>> <mailto:17772150287101 at callcentric.com>, trying
>>>>> REGISTER again (after 20 seconds)
>>>>>
>>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>>> Repeater Init 29626
>>>>>
>>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>>> Repeater Init 29627
>>>>>
>>>>> [Oct 8 08:47:46] NOTICE[699] app_rpt.c: Normal
>>>>> Repeater Init 1001
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[722] chan_usbradio.c:
>>>>> Loaded parameters from usbradio_tune_usb1001.conf
>>>>> for device usb1001 .
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c:
>>>>> Possibly stuck USB read channel. [usb1001]
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[720] chan_usbradio.c:
>>>>> Nope, USB read channel [usb1001] wasn't stuck
>>>>> after all.
>>>>>
>>>>> [Oct 8 08:47:47] NOTICE[719] chan_simpleusb.c:
>>>>> Assigned USB device 5-2:1.0 to simpleusb channel
>>>>> usb29626
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[719] chan_simpleusb.c:
>>>>> Loaded parameters from
>>>>> simpleusb_tune_usb29626.conf for device usb29626 .
>>>>>
>>>>> [Oct 8 08:47:47] NOTICE[721] chan_usbradio.c:
>>>>> Assigned USB device 5-2:1.0 to usbradio channel
>>>>> usb29627
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c:
>>>>> Loaded parameters from usbradio_tune_usb29627.conf
>>>>> for device usb29627 .
>>>>>
>>>>> [Oct 8 08:47:47] WARNING[721] chan_usbradio.c:
>>>>> Unable to re-open DSP device 2 (usb29627): Device
>>>>> or resource busy
>>>>>
>>>>> [Oct 8 08:48:06] NOTICE[714] chan_sip.c: --
>>>>> Registration for '17772150287101 at callcentric.com
>>>>> <mailto:17772150287101 at callcentric.com>' timed
>>>>> out, trying again (Attempt #1)
>>>>>
>>>>> [Oct 8 08:59:15] NOTICE[673] cdr.c: CDR simple
>>>>> logging enabled.
>>>>>
>>>>> [Oct 8 08:59:15] NOTICE[673] loader.c: 57 modules
>>>>> will be loaded.
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[673] acl.c: is not a
>>>>> valid IP
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[673] acl.c: Unable to
>>>>> lookup 'callcentric.com <http://callcentric.com>'
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: No such
>>>>> host: callcentric.com <http://callcentric.com>
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[711] chan_sip.c: Probably
>>>>> a DNS error for registration to
>>>>> 17772150287101 at callcentric.com
>>>>> <mailto:17772150287101 at callcentric.com>, trying
>>>>> REGISTER again (after 20 seconds)
>>>>>
>>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>>> Repeater Init 29626
>>>>>
>>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>>> Repeater Init 29627
>>>>>
>>>>> [Oct 8 08:59:15] NOTICE[695] app_rpt.c: Normal
>>>>> Repeater Init 1001
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[718] chan_usbradio.c:
>>>>> Loaded parameters from usbradio_tune_usb29627.conf
>>>>> for device usb29627 .
>>>>>
>>>>> [Oct 8 08:59:15] WARNING[715] chan_usbradio.c:
>>>>> Possibly stuck USB read channel. [usb29627]
>>>>>
>>>>> [Oct 8 08:59:16] WARNING[715] chan_usbradio.c:
>>>>> Nope, USB read channel [usb29627] wasn't stuck
>>>>> after all.
>>>>>
>>>>> [Oct 8 08:59:16] NOTICE[719] chan_usbradio.c:
>>>>> Assigned USB device 5-2:1.0 to usbradio channel
>>>>> usb1001
>>>>>
>>>>> [Oct 8 08:59:16] NOTICE[716] chan_simpleusb.c:
>>>>> Assigned USB device 5-2:1.0 to simpleusb channel
>>>>> usb29626
>>>>>
>>>>> [Oct 8 08:59:16] WARNING[716] chan_simpleusb.c:
>>>>> Loaded parameters from
>>>>> simpleusb_tune_usb29626.conf for device usb29626 .
>>>>>
>>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c:
>>>>> Loaded parameters from usbradio_tune_usb1001.conf
>>>>> for device usb1001 .
>>>>>
>>>>> [Oct 8 08:59:16] WARNING[719] chan_usbradio.c:
>>>>> Unable to re-open DSP device 2 (usb1001): Device
>>>>> or resource busy
>>>>>
>>>>> [Oct 8 08:59:35] NOTICE[711] chan_sip.c: --
>>>>> Registration for '17772150287101 at callcentric.com
>>>>> <mailto:17772150287101 at callcentric.com>' timed
>>>>> out, trying again (Attempt #1)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> - Is there something else to enable or a better
>>>>> app to use, for feeding to broadcastify?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> App_rpt-users mailing list
>>>>> App_rpt-users at ohnosec.org
>>>>> <mailto:App_rpt-users at ohnosec.org>
>>>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>>>
>>>>> To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
>>>>> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>>>>
>>>> --
>>>> "Anything is possible if you don't know what you are talking about."
>>>> 1st Law of Logic
>>>>
>>>>
>>>
>>> --
>>> "Anything is possible if you don't know what you are talking about."
>>> 1st Law of Logic
>>>
>>>
>>
>> --
>> "Anything is possible if you don't know what you are talking about."
>> 1st Law of Logic
>>
>>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151008/215d45b1/attachment.html>
More information about the App_rpt-users
mailing list