[App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

[Pete M]

Steve the FAQ is very well done.. 

Can I suggest to had a link on how to burn the image to the sd card?

something like that:

https://www.raspberrypi.org/documentation/installation/installing-images/

Not every one know how to do this when they get a RPI for the first time. And I am sure many will buy one just for there repeater project and wont do this very often..

Beside that, like I said at the beginning.. marvelous job!


From: Steve N4IRS 
Sent: Tuesday, October 27, 2015 10:35 AM
To: N7MTC . ; app_rpt-users at ohnosec.org 
Subject: Re: [App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

Mac,
The RPi2 install is pretty much download the image, burn it to SD card,.
Once the Pi boots, you can login on the HDMI / USB console, or SSH into the board on port 222.
The board is setup for DHCP so check your DHCP (router) server for address.
If you want, you can login via the built in serial port at 115,200
System will walk you through setup.

FAQ for DIAL is at:
<http://docs.allstarlink.org/drupal/node/170>

73, Steve N4IRS
 


On 10/27/2015 10:20 AM, N7MTC . wrote:

  Is there a procedure for loading the "new" DIAL version of asterisk for Raspberry pi2?   

   

  I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x using the Arcom RC-210 and  the Arcom ADR.  I noticed DIAL has replaced ACID as the latest flavor of asterisk for both PC and PI2.  I have not found any install write-ups or YouTubes showing a DIAL install.

   

  Regardless of which platform I will need to use an USB to Serial adapter to connect the ALLSTAR node to the repeater controller.  It will be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.

   

   

  /73

  Mac, N7MTC

   

   

  Benjamin Franklin - "Those who surrender freedom for security will not have, nor do they deserve, either one."

    

   

_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. 



--------------------------------------------------------------------------------
_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151027/99369068/attachment.html>