[App_rpt-users] Procedure for loading DIAL on a R-Pi2 or a PC

[Steve N4IRS]

Mac,
The RPi2 install is pretty much download the image, burn it to SD card,.
Once the Pi boots, you can login on the HDMI / USB console, or SSH into 
the board on port 222.
The board is setup for DHCP so check your DHCP (router) server for address.
If you want, you can login via the built in serial port at 115,200
System will walk you through setup.

FAQ for DIAL is at:
<http://docs.allstarlink.org/drupal/node/170>

73, Steve N4IRS


On 10/27/2015 10:20 AM, N7MTC . wrote:
>
> Is there a procedure for loading the "new" DIAL version of asterisk 
> for Raspberry pi2?
>
> I am looking to connect either a Pi2 or an intel NUC to a Yaesu Dr-1x 
> using the Arcom RC-210 andthe Arcom ADR.I noticed DIAL has replaced 
> ACID as the latest flavor of asterisk for both PC and PI2.I have not 
> found any install write-ups or YouTubes showing a DIAL install.
>
> Regardless of which platform I will need to use an USB to Serial 
> adapter to connect the ALLSTAR node to the repeater controller.It will 
> be of the FTDI chipset either a trendnet Tu-s9 or a GearMo USB RS-232.
>
> /73
>
> Mac, N7MTC
>
> Benjamin Franklin - "Those who surrender freedom for security will not 
> have, nor do they deserve, either one."
>
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20151027/0e1cc761/attachment.html>