[App_rpt-users] rxdemod=speaker not working for remote base

[Skyler F]

I figured it out, I had to turn rxsquelchdelay off.

On Sun, Apr 3, 2016 at 1:33 PM, Skyler F <electricity440 at gmail.com> wrote:

> I just set up a remote base with deemphasized audio, not discriminator.
>
> On usbradio.conf when I set up rxdemod=flat, the audio sounds very bassy
> coming from my remote base, so I changed it to rxdemod=speaker.
>
> I restarted asterisk, and now no audio came from the radio, just a dead
> carrier, even when I turned the rx level to 999 in usbradio.conf.
>
> 73
> Skyler
>
> _____________________________________
> Here is my usbradio.conf file:
> [general]
>
> [usb]
>
> hdwtype=0
> rxboost=1
> txboost=0
> rxctcssrelax=1
> txctcssdefault=250.3
> ;rxctcssfreqs=100
> ;txctcssfreqs=100
> ;rxctcssoverride=1
> carrierfrom=usb
> ctcssfrom=usb
> rxdemod=speaker !!!I get audio when this is set to flat, but nothing on
> speaker!!!
> txprelim=no
> txlimonly=no
> txtoctype=phase
> txmixa=composite
> txmixb=no
> invertptt=0
> duplex=1
> rxondelay=1
> rxsquelchdelay=25
> rxnoisefiltype=0
> eeprom=0
>
> ;gpio=out1
>
> gpio1 = out1         ; in, out0 or out1
> gpio2 = out1
> gpio4 = in        ; in, out0 or out1
>
>
>
>


-- 
Skyler Fennell
amsatnet.info
KDØWHB
electricity440 at gmail.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160403/191b7e1d/attachment.html>