[App_rpt-users] Understanding ilink,9 usage

[Steve Zingman]

Node 2100 is just that, a node like every other node. I just happened to 
choose it for a example.

On 04/04/2016 06:20 PM, LaRoy McCann wrote:
> Ok, I have to ask.
>
> Just what would node 2100 do with this text message that it is being 
> sent?
>
> And with full disclosure here, I have not looked thru the docs for 
> this information yet.
>
> 73's
> LaRoy McCann, K5TW
>
>
>
> On 4/4/2016 2:26 PM, Steve Zingman wrote:
>> Larry,
>> To send a text message from a DIAL node to a another node you will 
>> need to edit /etc/asterisk/modules.conf
>> change:  noload => app_sendtext.so to
>> load => app_sendtext.so and restart asterisk.
>> This will be fixed in future revisions of DIAL
>>
>> from the asterisk cli the command would be"
>> CLI> rpt cmd your node number ilink 9 destination node number,"This 
>> is a test"
>>
>> Send a text message of This is a test from node 2154 to node 2100:
>> rpt cmd 2154 ilink 9 2100,"This is a test"
>>
>> The message has to be either 1 word or enclosed in quotes.
>> Notice the comma after the destination node number.
>>
>> This is also valid from the cli:
>> rpt sendtext 2154 2100 "This is another test"
>>
>> As a DTMF command, the entry for 809 wont do anything. You could have:
>> 809 = ilink,9,2100,"Testing ..." would send a text message to node 2100
>> or, 809 = ilink,9,0,"Testing ..." Which would send the text message 
>> to all connected nodes.
>>
>> Hope that helps.
>>
>> 73, Steve N4IRS
>>
>>
>>
>> On 4/3/2016 2:28 PM, larry wrote:
>>> Recently I installed a Dial version on a RPi2
>>>
>>> In it includes command to use ilink,9 to send a text message to 
>>> another node.
>>> I am unable to find additional info about ilink,9 and how it works.
>>>
>>> Could someone give me an explanation if how to utilize it?
>>> Also what if anything needs to be pre-configured locally or at the 
>>> receiving node to use this function.
>>>
>>> A command syntax example would be nice as I am confused by the 
>>> comment following the defined DTMF of 809
>>> Rpt.conf defines ....  809 = ilink,9           ; Send Text Message 
>>> (9,<destnodeno or 0 (for all)>,Message Text, etc.
>>>
>>> Thanks
>>>
>>> Larry - N7FM
>>>
>>> _______________________________________________
>>> App_rpt-users mailing list
>>> App_rpt-users at ohnosec.org
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>>>
>>> To unsubscribe from this list please visit 
>>> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
>>> down to the bottom of the page. Enter your email address and press 
>>> the "Unsubscribe or edit options button"
>>> You do not need a password to unsubscribe, you can do it via email 
>>> confirmation. If you have trouble unsubscribing, please send a 
>>> message to the list detailing the problem. 
>>
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit 
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll 
> down to the bottom of the page. Enter your email address and press the 
> "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email 
> confirmation. If you have trouble unsubscribing, please send a message 
> to the list detailing the problem. 

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic