[App_rpt-users] Disabling ID functions

[Steve Zingman]

Stephen,
Take a look at the duplex setting at the top of rpt.conf

more if you need it...
73, Steve N4IRS


On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
> This is not glaringly obvious to me... so I'm wondering if it's 
> possible or supported. I have my URI tied into a port of my repeater 
> controller specifically for Allstar access and a few other things, and 
> my ID requirement is being handled by the controller itself.
>
> How do I disable the ID coming from app_rpt? I saw these options in 
> the rpt.conf file, but I wasn't sure if commenting them out or setting 
> the time to "0" would effectively disable it?
>
> idrecording = |iK1LNX                   ; id recording or morse string 
> see http://ohnosec.org/drupal/node/87
> idtalkover = |iK1LNX                    ; Talkover ID (optional) 
> default is none see http://ohnosec.org/drupal/node/129
> idtime = 540000                         ; id interval time (in ms) 
> (optional) Default 5 minutes (300000 ms)
> politeid = 30000                        ; time in milliseconds before 
> ID timer expires to try and ID in the tail. (optional, default 30000)
>
> tnx
> Stephen
> K1LNX
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

-- 
"Anything is possible if you don't know what you are talking about."
1st Law of Logic

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160406/19e39cb3/attachment.html>