[App_rpt-users] Disabling ID functions

[Stephen - K1LNX]

Thanks Steve, this is what I have set:

duplex = 0                              ; 0 = Half duplex with no telemetry
tones or hang time.
linktolink = yes                        ;     Special Case: Full duplex if
linktolink is set to yes.
                                        ;     This mode is preferred when
interfacing with an external multiport repeater controller.

Should I still be getting ID's in this case?

On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman at msgstor.com> wrote:

> Stephen,
> Take a look at the duplex setting at the top of rpt.conf
>
> more if you need it...
> 73, Steve N4IRS
>
>
>
> On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
>
> This is not glaringly obvious to me... so I'm wondering if it's possible
> or supported. I have my URI tied into a port of my repeater controller
> specifically for Allstar access and a few other things, and my ID
> requirement is being handled by the controller itself.
>
> How do I disable the ID coming from app_rpt? I saw these options in the
> rpt.conf file, but I wasn't sure if commenting them out or setting the time
> to "0" would effectively disable it?
>
> idrecording = |iK1LNX                   ; id recording or morse string see
> http://ohnosec.org/drupal/node/87
> idtalkover = |iK1LNX                    ; Talkover ID (optional) default
> is none see http://ohnosec.org/drupal/node/129
> idtime = 540000                         ; id interval time (in ms)
> (optional) Default 5 minutes (300000 ms)
> politeid = 30000                        ; time in milliseconds before ID
> timer expires to try and ID in the tail. (optional, default 30000)
>
> tnx
> Stephen
> K1LNX
>
>
> _______________________________________________
> App_rpt-users mailing listApp_rpt-users at ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
>
>
> --
> "Anything is possible if you don't know what you are talking about."
> 1st Law of Logic
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20160406/10a36fa4/attachment.html>