[App_rpt-users] Echolink : Now hearing four (unwanted) quick bips...

[mike at midnighteng.com]

Your complaint of echolink experience should be directed at echolink.
Nobody here can control or enforce poxy's proper handling.

Your CT settings are all in rpt.conf

unlinkedct=ct2
remotect=ct3
linkunkeyct=ct8
nolocallinkct=1   ; Use unlinkedct if only connected to a local node

&

[telemetry]
ct1=|t(350,0,100,2048)(500,0,100,2048)(660,0,100,2048)
ct2=|t(660,880,150,2048)
ct3=|t(440,0,150,4096)
ct4=|t(550,0,150,2048)
ct5=|t(660,0,150,2048)
ct6=|t(880,0,150,2048)
ct7=|t(660,440,150,2048)
ct8=|t(700,1100,150,2048)

;As far as what the numbers mean,
;(0.0.10.0)
; |  |  |    |-------amplitude
; |  |  |-----------duration
; |  |--------------Tone 2
; |----------------Tone 1


So you might just look at your config for the node and see what CT is the 4 beeps
and look for that setting in the node stanza.

...mike/kb8jnm


>
> Le 06/04/2016 23:45, mike at midnighteng.com a écrit :
>> When you hear some other callsign, it will announce the proxy station and not the
>> proxy user for non direct connects. Some proxy's don't have proper handling and
>> that can screw things up.
>
> I'm quite disappointed with the Echolink module. Despite my tries, I
> didn't manage to have it work as expected. I'm using the Android
> Echolink client. I do not have any control about what proxy is used.
> Sometimes, I hear an unknown callsign. But most of the time, I hear no
> callsign at all. I never heard *my* callsign ! Am I the only one having
> this behaviour ?
>
> Moreover, my radio node is connected to a hub. When my Echolink node is
> also connected to the hub, on the radio, I can hear four quick acute
> bips before the "normal" bip (remotetx or linkunkeyct). I tried all the
> CTs, but I didn't find where those are located, and I didn't manage to
> remove them. When the Echolink node is disconnected from the hub, I do
> not hear those 4 bips. From where are they coming ? And how to remove /
> change them ?
>
> Thank you in advance...
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
>
> To unsubscribe from this list please visit
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the
> bottom of the page. Enter your email address and press the "Unsubscribe or edit
> options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If
> you have trouble unsubscribing, please send a message to the list detailing the
> problem.
>