[App_rpt-users] Switch to CW ID upon key up

[Buddy Brannan]

The idtalkover= line should do this. 
idtalkover=|ide KB5ELV/R 

--
Buddy Brannan, KB5ELV - Erie, PA
Phone: 814-860-3194 
Mobile: 814-431-0962
Email: buddy at brannan.name




> On Aug 17, 2016, at 3:47 PM, Joe Moskalski <kc2irv at gmail.com> wrote:
> 
> I was wondering if anyone has found a good clean way to cause the voice ID to switch to a CW when someone keys up on a system operating in a repeater configuration. This is something most hardware controllers do and its a function I would like to try to implement. I figured I would ask here before trying to re-invent the wheel. Ideally, it would switch to a CW ID when a local station would key into the system and also when a remote connection would key up as well. 
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.