[App_rpt-users] missed **** rx un-key

[Lu V]

Actually this has been a long time issue on all platforms that would happen from time to time. In fact it would send the push to talk to the entire network of connected nodes.  And what you described is exactly the workaround.

Lu Vencl
KA4EPS

> On Feb 8, 2016, at 13:07, dropbox at digitalattack.org dropbox at digitalattack.org <dropbox at digitalattack.org> wrote:
> 
> hardware: raspberry pi 2b with uri
> 
> problem: raspberry pi 2b not seeing **** rx un-key if ptt released too quickly
> after final dtmf digit. I can repeat the issue by connecting to a node then:
> push ptt,*,7,1,release ptt. if i pause before releasing ptt
> then all is fine. if i release ptt immediately or same time as last dtmf digit
> then **** rx un-key is missed. i verified COD and did see the signal go from hi
> to low to the uri and didnt see the **** rx un-key in app rpt debug level 7.
> 
> any suggestions?
> 
> thanks, Gregory, KK6DOI
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
> 
> To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
> You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.